Qian Y, Liu B, Hong J, Jiang M, Zhang Z, Zhang L, Huang H, Yan J. Simultaneous flattening and hardening of laser shock peened Zr-based metallic glass surface by nanosecond laser irradiation in a flowing nitrogen atmosphere. Journal of Materials Processing Technology. 2024. 326
Brüssel F, Huang W, Yan J. Investigation of failure modes and material structural responses of nanographite coatings on single-crystal silicon by nanoscratching. Tribology International. 2024. 193
Yamamuro Y, Shimoyama T, Nagata H, Yan J. Effect of dopant concentration on femtosecond pulsed laser irradiation of yttria-stabilized zirconia for generating nanopores. Journal of Alloys and Compounds. 2024. 980
An H, Qian Y, Zhang L, Zhang Z, Huang H, Yan J. On the surface characteristics and removability of RB-SiC composite processed by nanosecond pulsed laser. Composites Part A: Applied Science and Manufacturing. 2024. 180
Mansour M.M, El-Hofy H, Yan J, Maher I, Nassef M.G.A, Khaireldien W.M. Controlled vibration amplitude in ultrasonic assisted grinding using FRF guided cutting frequency. International Journal of Machining and Machinability of Materials. 2024. 25. 3-4. 408-431
Lin Zhang, Allen Y. Yi, Jiwang Yan. Flexible fabrication of Fresnel micro-lens array by off-spindle-axis diamond turning and precision glass molding. Precision Engineering. 2022. 74. 186-194
Advanced Ceramic Coatings: Fundamentals, Manufacturing, and Classification, R. K. Gupta, A. Motallebzadeh, S. Kakooei, T. A. Nguyen, A. Behera (eds.)
Elsevier B. V. 2023 ISBN:9780323996594
Electrical discharge coating with quarry dust powder suspension
Advanced Ceramic Coatings: Fundamentals, Manufacturing, and Classification 2023 ISBN:9780323996600
Multidisciplinary Science in Micro/Nanoscale Manufacturing
Elsevier B.V. 2020
Special Issue on Multidisciplinary Science in Micro/nanoscale Manufacturing
Elsevier B.V. 2020
Cutting of Microgrooves on Ferrous Metal by Using Laser-Processed cBN Tools
(The 19th International Conference on Precision Engineering (ICPE2022))
Effect of dopant concentration on femtosecond pulsed laser processing characteristics of yttria-stabilized zirconia
(The 19th International Conference on Precision Engineering (ICPE2022))
Laser-induced periodic surface structures generation on single-crystal 4H-SiC by femtosecond pulsed infrared laser irradiation
(The 19th International Conference on Precision Engineering (ICPE2022))
Fabrication of optical surfaces on polymethyl methacrylate by ultra-precision diamond turning
(The 9th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2022))
A Novel Calibration Method of Machining Misalignment in FTS-Based Diamond Turning
(The 9th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2022))
2023/03 - International Journal of Extreme Manufacturing (IJEM), IoP publishing 2022 IJEM Best Paper Award Tool path generation and optimization for freeform surface diamond turning based on an independently controlled fast tool servo
2023/03 - 精密工学会 精密工学会論文賞 Flexible fabrication of Fresnel micro-lens array by off-spindle-axis diamond turning and precision glass molding
2021/06/07 - 工作機械技術振興財団 工作機械技術振興賞(論文賞) Measurement and Compensation of Tool Contour Error Using White Light Interferometry for Ultra-Precision Diamond Turning of Freeform Surfaces
2021/06 - 工作機械技術振興財団 工作機械技術振興賞(論文賞) Measurement and Compensation of Tool Contour Error Using White Light Interferometry for Ultra-Precision Diamond Turning of Freeform Surfaces
2020/10/18 - International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2020) PRESM2020 Best Paper Award Response of Resin Coating Films Containing Fine Metal Particles to Ultrashort Laser Pulses
2020/10/16 - International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2020) PRESM2020 Best Paper Award Response of Resin Coating Films Containing Fine Metal Particles to Ultrashort Laser Pulses
2020/10 - International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2020) PRESM2020 Best Paper Award Response of Resin Coating Films Containing Fine Metal Particles to Ultrashort Laser Pulses
2020/09/16 - International Journal of Extreme Manufacturing (IJEM), IoP publishing Outstanding Paper Award Manufacturing technologies toward extreme precision
2020/09 - International Journal of Extreme Manufacturing (IJEM), IoP publishing Outstanding Paper Award Manufacturing technologies toward extreme precision
2019/11/14 - The 8th International Conference of ASPEN ASPEN2019 Best Paper Award Chatter suppression in ultra-precision cutting of thin material substrates
2019/11 - The 8th International Conference of ASPEN ASPEN2019 Best Paper Award Chatter suppression in ultra-precision cutting of thin material substrates
2018/07/13 - CIRP CSI 2018 CIRP CSI 2018 Best Paper Award Investigation of Subsurface Damage Behaviors in Single-crystal Ge by Multi-cyclic Nanoindentation
2018/07 - CIRP CSI 2018 CIRP CSI 2018 Best Paper Award Investigation of Subsurface Damage Behaviors in Single-crystal Ge by Multi-cyclic Nanoindentation
2018/03/16 - 精密工学会 精密工学会高城賞 Mechanisms of material removal and subsurface damage in fixed-abrasive diamond wire slicing of single-crystalline silicon
2018/03 - 精密工学会 精密工学会高城賞 Mechanisms of material removal and subsurface damage in fixed-abrasive diamond wire slicing of single-crystalline silicon
2017/11/15 - 日本機械学会生産加工・工作機械部門 日本機械学会生産加工・工作機械部門優秀講演論文表彰 Healing of micro-cracks in optical glass using a pulsed laser
2017/11 - 日本機械学会生産加工・工作機械部門 日本機械学会生産加工・工作機械部門優秀講演論文表彰 Healing of micro-cracks in optical glass using a pulsed laser
2017/10/16 - Industrial Technology Research Institute ITRI Best Paper Award Diamond turning of high-precision roll-to-roll imprinting molds for fabricating subwavelength gratings
2017/10 - Industrial Technology Research Institute ITRI Best Paper Award Diamond turning of high-precision roll-to-roll imprinting molds for fabricating subwavelength gratings
2010/03/04 - 精密工学会 精密工学会論文賞 Fundamental investigation on subsurface damage in single crystalline silicon caused by diamond machining
2010/03 - 精密工学会 精密工学会論文賞 Fundamental investigation on subsurface damage in single crystalline silicon caused by diamond machining
2009/12/03 - 日本機械学会生産加工・工作機械部門 日本機械学会生産加工・工作機械部門優秀講演論文表彰 Study on Nonisothermal Glass Molding Press for Aspherical Lens
2009/12 - 日本機械学会生産加工・工作機械部門 日本機械学会生産加工・工作機械部門優秀講演論文表彰 Study on Nonisothermal Glass Molding Press for Aspherical Lens
2009/11/12 - Asian Symposium for Precision Engineering and Nanotechnology ASPEN2009 President Prize Best Paper Award Numerical and Experimental Investigation on the Transferability of Ultraprecision Glass Molding Press for Microgrooves
2009/11 - Asian Symposium for Precision Engineering and Nanotechnology ASPEN2009 President Prize Best Paper Award Numerical and Experimental Investigation on the Transferability of Ultraprecision Glass Molding Press for Microgrooves
2003/05/23 - The 4th Int. Conf. on Intelligent Processing and Manufacturing of Materials Best Paper Award in Materials Processing Ductile Machining Phenomena of Nominally Brittle Materials at the Nanoscale
2003/05 - The 4th Int. Conf. on Intelligent Processing and Manufacturing of Materials Best Paper Award in Materials Processing Ductile Machining Phenomena of Nominally Brittle Materials at the Nanoscale
1998/04/01 - 日本機械学会生産加工・工作機械部門 日本機械学会生産加工・工作機械部門優秀講演論文賞 Tool Shape Effects on Diamond Cutting Process and Finished Surface Quality
1998/04 - 日本機械学会生産加工・工作機械部門 日本機械学会生産加工・工作機械部門優秀講演論文賞 Tool Shape Effects on Diamond Cutting Process and Finished Surface Quality
全件表示
所属学会 (9件):
The International Academy for Production Engineering (CIRP)
, 電気加工学会
, レーザ加工学会
, European Society for Precision Engineering and Nanotechnology (euspen)
, 応用物理学会
, 砥粒加工学会
, American Society for Precision Engineering (ASPE)
, 精密工学会
, 日本機械学会