YOSHIDA Ichiro | Researcher Information

Hosei University Hosei University Management Committee Member, The Research Institute for Innovation Management
Hosei University Faculty of Science and Engineering Department of Mechanical Engineering Professor, Course of Aviation Technology
Hosei University Hosei University Member, The Research Institute for Innovation Management

2018 - 2021 科研費基盤研究(C) 平成30年度(平成30年度~平成32年度)

Yudai Yamaguchi, Ichiro Yoshida, Yuki Kondo, Munetoshi Numada, Hiroyasu Koshimizu, Kaito Oshiro, Ryo Saito. Edge-preserving smoothing filter using fast M-estimation method with an automatic determination algorithm for basic width. Scientific Reports. 2023. 13. 5477. 1-28
Yuki Kondo, Ichiro YOSHIDA, Munetoshi Numada, Hiroyasu Koshimizu, 2217353, Kaito Fujiyoshi. Verification of Characteristics of Spline Filter Series Robust Filters for Surface Roughness and Proposal of Filter Selection Guidelines. Applied Sciences. 2023. 13. 6. 3390/1-3390/12
Masamichi SOTOYAMA, Yuki KONDO, Ichiro YOSHIDA, Munetoshi NUMADA, Kazuhide KAMIYA, and Hiroyasu KOSHIMIZU. Fast Calculation Method of A Robust Spline Filter by Using Frequency-domain Method (Accepted 31st October, 2022). Journal of the Japan Society of Precision Engineering. 2023. 89. 2. 207-212
Yuki Kondo, Ichiro Yoshida, Dan Nakaya, Munetoshi Numada, Hiroyasu Koshimizu. Correction: Verification of Characteristics of Gaussian Filter Series for Surface Roughness in ISO and Proposal of Filter Selection Guidelines. Nanomanufacturing and Metrology. 2022. 3. 4. 97-108
Ryo Sakakibara, Ichiro Yoshida, Yuki Kondo, Munetoshi Numada, Kenichi Yamashita. Correction: A Proposal of Hyperbolic Fitting Method by Applying the Properties of Functions for Plateau Surface Analysis in ISO 13565-3. Nanomanufacturing and Metrology. 2022. 3. 4. 86-96

ｍore...

Ichiro YOSHIDA, Ryo SAKAKIBARA, and Sho NAGAI. Trends in ISO Standards and Analytical Technologies for Surface Texture and Surface Roughness (Accepted 22th July, 2022),,Invited Paper, Refereed Review Paper. Journal of Japanese Society of Tribologists, Tribologists. 2022. 67. 11. 737-744
Ichiro Yoshida, Yuki Kondo, Ryo Sakakibara, Munetoshi Numada, Hiroyasu Koshimizu. Research on effective analysis methods of surface texture for machine tool tribology Invited Paper. Proceedings of Tribology Conference 2020 Autumn Beppu. 2020. 72-73
YOSHIDA Ichiro. Areal Surface Texture Parameters in JIS, ISO Standards, and Measurement Technology / Measuring Examples,,Invited Paper. Journal of the Japan Society for Abrasive Technology. 2020. 31. 8. 18-21
YOSHIDA Ichiro. Lecture of Tribology : Basic Knowledge of Surface Texture and Surface Roughness, Part 3, Analysis of Surface Texture : Surface Texture Parameters for Contacting Surfaces and Sliding Surfaces,,Invited Paper, Refereed Review Paper. Journal of Japanese Society of Tribologists, Tribologists. 2020. 65. 1. 31-34
YOSHIDA Ichiro. Lecture of Tribology : Basic Knowledge of Surface Texture and Roughness, Part 2,- Analysis of Surface Texture:Introduction of Parameters on Material Ratio Curve and Motif Method -,,Invited Paper, Refereed Review Paper. Journal of Japanese Society of Tribologists, Tribologists. 2018. 63. 7. 480-483

ｍore...

Evaluating method of residual stress for resin molded products
Patent No. P,,Surface property analysis method, surface property comparison evaluation method, and surface measurement system
表面形状測定方法及び表面形状測定装置
切削円周面測定装置および被切削物測定方法
形状測定装置

ｍore...

Descriptive geometry
CORONA Publishing Co., Ltd. 2022 ISBN:9784339046779
Introduction to Precision Engineering, ,Volume 1
Kindai kagaku sha Co.,Ltd. an Impress Group company 2022 ISBN:9784764960350
Introduction to Precision Engineering, ,Volume 2
Kindai kagaku sha Co.,Ltd. an Impress Group company 2022 ISBN:9784764960367
Profile projectors, (JIS B 7184:2021)
Japan Optical Measuring Instruments Manufactures’ Association, Japanese Standards Association 2021
Geometrical product specifications (GPS) -- Matrix model, (JIS B 0661:2020)
Japanese Standards Association 2020

ｍore...

"Knowledge and tips for good surface roughness measurement, and roughness evaluation methods for sliding surfaces and next-generation automotive parts" Invited Lecture
(Surface Roughness Evaluation Technology Seminar, Project of emergency measures for the technological foundation strengthening of the manufacturing industry 2021)
"Research of Plateau Surface Roughness Analysis Method by Using Radon Transform" and "Research of Estimation Method for judging inside shellfish size without opening Shelled Oyster"
(2nd Koganei Seminar for Research Exchange 2019)
Study of performance change of small ball bearing left in high temperature environment
(Proceedings of the Japan Society for Precision Engineering 2012)
Observation of the Movement of a Stylus Tip of a Profilometer using Electrical Conductivity
(Journal of the Japan Society for Precision Engineering 2011)
Change of dimension and roundness of steel ball for ball bearing in condition of high temperature leaving
(Proceedings of the Japan Society for Precision Engineering 2011)

ｍore...

2002 - 2008 Meiji University Graduate School of Science and Technology Doctor's Degree in Mechanical Engineering
2000 - 2002 Meiji University Graduate School of Science and Technology Master's Degree in Mechanical Engineering
1996 - 2000 Meiji University Faculty of Science and Engineering Mechanical Engineering Informatics

Ph.D. (Doctor of Engineering) (Meiji University)
Master of Engineering (Meiji University)

2021/07 - 現在 Hosei University Management Committee Member, The Research Institute for Innovation Management
2021/07 - 現在 Hosei University
2021/07 - 現在 Hosei University
2021/07 - 現在 Hosei University Member, The Research Institute for Innovation Management
2021/07 - 現在 Hosei University

2021/07 - 現在 Hosei University Professor, Course of Aviation Technology

2021/04 - 2021/07 Chukyo University Institute for Advanced Studies in Artificial Intelligence Management Committee Member, The Research Institute for Innovation Management

2021/04 - 2021/07 Sophia University Faculty of Science and Technology Professor, Course of Aviation Technology

2021/04 - 2021/07 The University of Tokyo

2021/04 - 2021/07 Hosei University

2020/04/01 - 2020/09/30 Meiji University Department of Mechanical Engineering Part-time lecturer: Metrology

2019/05/01 - The University of Tokyo Institute of Industrial Science Research Fellow

2019/04/01 - HOSEI University Department of Mechanical Engineering, Faculty of Science and Engineering Professor

2018/04/01 - 2019/03/31 HOSEI University Department of Mechanical Engineering, Faculty of Science and Engineering Associate Professor

2019/03/26 - The Japanese Standards Association (JSA) Registration Center of Experts for Standardization Expert for Standardization

2016/04/01 - 2018/03/31 HOSEI University Department of Mechanical Engineering, Faculty of Science and Engineering Associate Professor/ Junior Associate Professor/ Lecturer

2009/04 - 2016/03 Kosaka Laboratory Co., Ltd. Development and Project Planing Dept., Instruments Div. Section Manager

2013/04/01 - 2015/09/30 Tokyo University of Science Department of Mechanical Engineering Part-time lecturer: Metrology

2015/04/01 - Sophia University Faculty of Science and Technology Collaborative Researcher

2014/04/01 - 2014/09/30 Sophia University Department of Engineering and Applied Sciences Part-time lecturer: Design Engineering

2012/04/01 - Chukyo University Institute of Advanced Studies in Artificial Intelligence Project Researcher

2008/10 - 2009/03 Kosaka Laboratory Co., Ltd. Development and Project Planing Dept., Instruments Div. Acting Section Manager

2006/04 - 2008/09 Japan Science and Technology Agency Nagaoka University of Technology Researcher

2002/04/01 - 2006/03/31 Musashi University Department of Economics Part-time lecturer: Practice in Information Processing I and II

2003/04 - 2006/03 Meiji University Faculty of Science and Engineering Research Associate

Show all

2020/03 - 現在 The Japan Society for Precision Engineering Chairman, Journal Editorial Board, Publication Division
2019/04 - 現在 The Japan Society of Mechanical Engineers Member, Actuator System Technical Committee (AS Committee), JSME Machine Design and Tribology Division
2018/05 - 現在 The Japan Society for Design Engineering Peer-Review Steering Committee, Publication Division
2017/10 - 現在 ISO, International Organization for Standardization Expert member of ISO/TC 213 committee
2017/06 - 現在 The Japan Society for Design Engineering Member of Steering Division for Research and Investigation

2017/01 - 現在 The Japan Society of Mechanical Engineers Member of Research Committee for Time-axis Design

2016/04 - 現在 Ministry of Education, Culture, Sports, Science and Technology S&T expert, The S&T Experts Network, National Institute of Science and Technology Policy, Ministry of Education, Culture, Sports, Science and Technology

2014/10 - 現在 The Japanese Society of Tribologists Member of Research Committee for Tribology of Machine Tools

2009/04 - 現在 Japanese Standards Association Member of Drafting Committee for JIS (in relation to ISO/TC213 Group A and C)

2021/04 - 2022/03 The Japan Society of Mechanical Engineers Secretary, Actuator System Technical Committee, JSME Machine Design and Tribology Division

2012/04 - 2022/03 Japanese Standards Association Secretary, ISO domestic committee (ISO/TC213 Secretary of Group A)

2020/07/01 - 2021/07/31 人事院 2021年度国家公務員採用総合職試験(大卒程度試験)試験専門委員

2020/07/01 - 2021/07/31 人事院 2021年度国家公務員採用総合職試験(院卒者試験)試験専門委員

2020/07 - 2021/07 National Personnel Authority Siken Senmon Iin (in Japanese) (Specialist for Examination Question Preparation, National Civil Service Recruitment Comprehensive Examination for university graduate)

2020/07 - 2021/07 National Personnel Authority Siken Senmon Iin (in Japanese) (Specialist for Examination Question Preparation, National Civil Service Recruitment Comprehensive Examination for master degree graduate)

2021/04/01 - The Japan Society of Mechanical Engineers Secretary, Actuator System Technical Committee, JSME Machine Design and Tribology Division

2019/11/01 - 2020/07/31 人事院 2020年度国家公務員採用総合職試験(院卒者試験)試験専門委員

2019/11/01 - 2020/07/31 人事院 2020年度国家公務員採用総合職試験(大卒程度試験)試験専門委員

2019/08/01 - 2020/07/31 JAPAN Optical Measuring Instruments Manufacturer's Association Member of Drafting Committee for JIS (JIS B 7186(Profile Projector))

2019/11 - 2020/07 National Personnel Authority Siken Senmon Iin (in Japanese) (Specialist for Examination Question Preparation, National Civil Service Recruitment Comprehensive Examination for master degree graduate)

2019/11 - 2020/07 National Personnel Authority Siken Senmon Iin (in Japanese) (Specialist for Examination Question Preparation, National Civil Service Recruitment Comprehensive Examination for university graduate)

2019/08 - 2020/07 JAPAN Optical Measuring Instruments Manufacturer's Association Member of Drafting Committee for JIS (JIS B 7186(Profile Projector))

2020/04/01 - 精密工学会理事

2020/04/01 - The Japan Society for Precision Engineering Director

2019/04/01 - 2020/03/31 法政大学理系同窓会事務局長

2019/04/01 - 2020/03/31 日本機械学会機素潤滑設計部門幹事

2019/04/01 - 2020/03/31 The Japan Society of Mechanical Engineers Secretary, JSME Machine Design and Tribology Division

2018/04 - 2020/03/31 精密工学会事業部会統括幹事

2014/02 - 2020/03/31 精密工学会代議員

2019/04 - 2020/03 HOSEI University Rikei Doso-Kai (HOSEI University Science Course Alumni Association) Chief of Secretariat

2019/04 - 2020/03 The Japan Society of Mechanical Engineers Secretary, JSME Machine Design and Tribology Division

2018/04 - 2020/03 The Japan Society for Precision Engineering Secretary, Business and Project Division

2014/02 - 2020/03 The Japan Society for Precision Engineering Representative

2020/03 - 精密工学会会誌編集委員会委員長

2019/04/01 - The Japan Society of Mechanical Engineers Member, Actuator System Technical Committee (AS Committee), JSME Machine Design and Tribology Division

2018/05 - 日本設計工学会出版部会校閲運営委員委員

2016/04 - 2018/03 精密工学会研究協力委員会幹事

2016/04 - 2018/03 The Japan Society for Precision Engineering Secretary, Committee for Research and Collaboration

2017/10 - ISO 日本代表エキスパート委員 ISO/TC 213 committee

2017/10 - ISO, International Organization for Standardization Expert member of ISO/TC 213 committee

2017/06 - 日本設計工学会研究調査部会委員

2017/01 - 日本機械学会タイムアクシスデザイン研究会委員

2016/04 - 文部科学省科学技術・学術政策研究所科学技術予測センター文部科学省科学技術・学術政策研究所科学技術予測センター科学技術専門家ネットワーク専門調査員

2013/03 - 2016/02 独立行政法人製品評価技術基盤機構計量法に基づく校正事業者登録制度技術委員会,技術委員

2013/03 - 2016/02 National Institute of Technology and Evaluation Member, Technical committee of the Calibration laboratory accreditation system introduced by the amended Measurement Law

2011/04 - 2016/02 JAPAN OPTICAL MEASURING INSTRUMENTS MANUFACTURERS' ASSOCIATION Member, Technical committee

2014/02 - 2015/03 精密工学会アフィリエイト委員会(若手の会) 委員長

2014/02 - 2015/03 The Japan Society for Precision Engineering President, Young Researcher Association for JSPE

2014/10 - The Japanese Society of Tribologists Member of Research Committee for Tribology of Machine Tools

2012/04 - Japanese Standards Association Secretary, ISO domestic committee (ISO/TC213 Secretary of Group A, and Member of Group C)

2009/04 - Japanese Standards Association Member of Drafting Committee for JIS (in relation to ISO/TC213 Group A and C)

Show all

2019/05/25 - Japan Society for Design Engineering 2018 Best Paper Award Development of Evaluation Method for Surfaces Having Stratified Functional Properties
2019/05 - Japan Society for Design Engineering Best Paper Award 2018 Development of Evaluation Method for Surfaces Having Stratified Functional Properties
2015/11 - Kosaka Laboratory Ltd. Contribution Award Contribution Award (in Japanese)
2013/11 - Kosaka Laboratory Ltd. Special Award Special Award (in Japanese)
2011/11 - Kosaka Laboratory Ltd. Patent Application Award Patent Application Award (in Japanese)

Show all

The Advanced Institute of Wearable Environmental Information Networks , Academy of Human Informatics , The Society of Instrument and Control Engineers , The Japan Society for Precision Engineering , Japan Society for Design Engineering , Japanese Society of Tribologists , The Japan Society of Mechanical Engineers , Japan Society of Grinding Engineers , The Japan Society of Polymer Processing , The Society of Automotive Engineers of Japan