Rchr
J-GLOBAL ID:200901052963403281
Update date: Apr. 17, 2024
Nakano Takayoshi
ナカノ タカヨシ | Nakano Takayoshi
Affiliation and department:
Job title:
Professor
Other affiliations (1):
Homepage URL (2):
http://www.mat.eng.osaka-u.ac.jp/msp6/nakano/
,
http://www.mat.eng.osaka-u.ac.jp/msp6/nakano/en/
Research field (3):
Structural and functional materials
, Composite materials and interfaces
, Inorganic materials
Research keywords (16):
Materials Sceicen and Engineering based on Metal Metal Additive Manufacturing
, Collagen/Apataite orientation
, Bone Quality
, Additive manufacturing
, 結晶塑性
, 結晶工学
, 再生医工学
, 無機材料・物性
, 構造・機能材料
, 生体物性
, 生体材料
, Plastic Deformation
, Crystallography
, Tissue Engineering
, Inorganic Materials and Properties
, Structural and Functional Materials
Research theme for competitive and other funds (85):
- 2023 - 2026 Elucidation of controlling mechanisms for microstructural organization of bone tissue and the development of novel bone-substitute devices
- 2021 - 2026 Management of Science for Creation of Materials by Super-Thermal Field
- 2021 - 2026 Science for Creation of Super-Titanium by Super Thermal Field
- 2022 - 2025 「バイオハイエントロピー合金」X「超急冷金属3Dプリンティング」による新学術開拓
- 2022 - 2025 レーザ積層造形法による粉末とレーザの重畳効果を利用した高機能性発現材料の創製
- 2020 - 2024 Novel therapeutic strategies for bone metastasis; Targeting the microstructural alteration in metastasized bone
- 2019 - 2023 骨劣化を生じない新骨機能化インプラントロジー
- 2018 - 2023 "Materials Science of Anisotropy" for induction of bone tissue anisotropy
- 2020 - 2022 Development of a new scientific principle of anisotropic bone matrix science based on materials engineering
- 2018 - 2022 Molecular targeted therapy for MRONJ
- 2019 - 2021 Establishment of a new bone regeneration method that enables rapid recovery of bone mechanical function
- 2018 - 2020 Control of osteoblast arrangement by surface topography induced by plastic deformation
- 2017 - 2020 Development of a novel scientific principle of "Biological Materials Science of Bone"
- 2018 - 2019 骨自発的・人為的アプローチによる骨配向化機構の解明と制御
- 2016 - 2019 Clarification of self-adjusting capacity of strength in bone focusing on osteocytes
- 2016 - 2019 Development of toughness and creep strength of B added transition metal disilicides with lamellar structure
- 2015 - 2019 Treatment for promoting early healing of bone fracture using the combination of anti-osteoporosis drugs
- 2016 - 2018 Consideration of design principle for creating implant that does not cause strain shielding on bone based on bone matrix orientation
- 2015 - 2018 Development of the noble biodegradable implant composed of multi-phase intermetallic compounds, which spontaneously makes porous structure in human body
- 2015 - 2018 Establishment of micro-endodontic model in small animal and development of root canal treatment tschnique and root canal treatment drugs
- 2013 - 2018 Induction of anisotropic bone tissues based on combination of materials science and bone biology
- 2015 - 2017 Cellular mechanisms underlying anisotropic bone matrix construction
- 2015 - 2017 Development of biocompatible piezoelectric materials as an "active biomaterial"
- 2015 - 2017 Development of bone function-mimetic metallic implants that is recognized as "bone" itself
- 2015 - 2017 Optimization of implant design which controls bone quality under loaded conditions
- 2013 - 2017 Nanomechanics of jaw bone confirmed preferential alignment of biological apatite
- 2014 - 2016 Clarification of anomalous fatigue softening in biomedical Ti-Nb alloys
- 2013 - 2016 Control of BAp orientatio in mandible with the masticatory disturbance using gene-deleted pathological mice.
- 2013 - 2016 Bone mechanical functionalization by control of bone quality using stress field
- 2013 - 2015 Prototyping of composite products with bone-mimetic mechanical functions based on novel functionalization concept
- 2012 - 2015 Development of new biodegradable implant materials based on the intermetallic compounds
- 2012 - 2015 Development of experimental pathologic refractory periapical periodontitis model and investigation of its chemical supplemental methods
- 2013 - 2014 骨配向化機構に基づく骨代替生体材料の創製
- 2011 - 2014 Development of adhesive resins with the function to promote tissue regeneration by release of FGF-2
- 2010 - 2014 Clarification of implant loading condition on the basis of nanometer level structural analyses
- 2009 - 2013 異方性の材料科学に基づく骨配向化誘導
- 2011 - 2012 Clarification of the origin of fatigue softening and one variant ωphase in binary Ti-Nb based biomaterial alloys
- 2009 - 2011 Elucidation of the mechanism of biomineralization with acidic phosphoprotein from molecular evolution studies
- 2009 - 2011 Analysis of change in mandible bone microstructure induced by masticatory malfunction from a viewpoint of crystallography
- 2009 - 2011 The wave propagation in the bone surrounding dental implants using the thinning model of trabecular bone
- 2008 - 2010 生体内外環境制御による生体アパタイト配向化メカニズムの解明
- 2007 - 2010 The pursuit of conservative dental treatment design in a new era by diverse utilization of an antibacterial monomer
- 2009 - 2009 骨配向性を考慮した新規概念からなるバイオマテリアルの設計・開発
- 2009 - 2009 骨類似機能を発揮するパウダー/ソリッド三次元造形複合体の創製
- 2007 - 2008 Mechanism for formation of preferential alignment in bone microstructure
- 2007 - 2008 Analysis of bone mass and quality associated with biomechanical property in glucocorticoid osteopathy
- 2007 - 2008 マテリアル・ボーンバイオロジーの構築
- 2005 - 2008 Development of new bone method for evaluating pathological or regenerated hard tissues and bone design for biomedical application
- 2006 - 2007 A analysis of bone quality of growing rat mandible by a novel evaluation system
- 2005 - 2007 Produdion of transgenic mice and functional analysis ofosteaytesusingcis-regulatory regions
- 2006 - 2006 アトミスティック・メタラジーによる第3世代金属間化合物研究への新展開
- 2005 - 2006 強磁場を用いた骨組織の早期再生技術の開発と材料工学的解析
- 2003 - 2004 Functional Analysis of Dentin Matrix Protein 1 (DMP1) and Regulation Analysis of their Expression during Fracture Healing.
- 2003 - 2004 自己再生能力を持つ配向性ナノアパタイト材料の開発
- 2002 - 2004 Observation of lattice defects, deformation behavior in duplex alloys and evaluation of their lifetime using magnetic properties.
- 2002 - 2004 Development of new endodontic materials by changing microstructure of hydroxyapatite ceramics
- 2002 - 2003 再生骨のための配向性制御アパタイトの創製
- 2001 - 2002 Microstructure and plastic deformation in (C11_b/C40) duplex-phase silicide with a sigle set of lamellae
- 2000 - 2001 結晶性,形態制御アパタイトによる生体硬組織再生
- 1999 - 2001 Control of micro-structure and phase interface for concurrent design of multi-functional materials.
- 1999 - 2000 Clarification of processes for ordering and precipitation of long-period superstructures in Al-rich TiAl rapidly solidified ribbons
- 1998 - 2000 Development of NbSi_2-Based Duplex Silicides for Turbine Blade Operating at Ultra High-Temperature
- 1998 - 1999 磁気異方性によるNi_3Feの疲労微細組織観察
- 1997 - 1999 The stability of microstructure and the fatigue deformation mechanism of duplex aluminides containing fine precipitates under cyclic loading.
- 1999 - 配向性HAp結晶を用いた再生医工学技術の確立
- 1997 - 1998 Al-rich TiAl単結晶の変形挙動に及ぼすAl_5Ti_3型超格子規則相の寄与
- 1997 - 生体内硬組織におけるHAp結晶の配向性
- 1997 - Texture in biological hard tissues
- 1996 - 1996 交番変形応力下でのTi_3Al単結晶の疲労挙動の解明
- 1995 - 1996 Plastic Anisotropy and Fatigue Fracture Mechanism of TiAl Alloys under Cyclic Loading.
- 1995 - 1996 Development of Testing Machine for Mechanical Properties at Ultra High Temperature using Impulse Electron Irradiation
- 1995 - 1995 定応力制御下でのTiAl-PST結晶の疲労特性の解明
- 1995 - Development of biomaterials containing oriented HAp for regeneration hard tissues
- 1994 - 1994 Ti_3Al単結晶の破壊挙動に及ぼす塑性異方性の影響
- 1994 - 金属間化合物単結晶の疲労・破壊特性
- 1994 - Fatigue Behaviour of Single Crystals of Intermetallics.
- 1993 - 1993 AEを用いた方向制御層状組織を有するTiAiの破壊に関する研究
- 1992 - 耐火金属シリサイド単結晶の変形挙動
- 1992 - Plastic Behaviour of Refractory Silicide Single Crystals
- HAp結晶子配向性の解析(生体, 再生硬組織との)
- シリサイド単結晶の異常強化機構
- Al-rich TiAlの組織と変形機構
- Analysis of HAp crystallite orientation in hard tissues.
- Anomalous strengthening mechanism of silicide single crystals
- Microstructure and deformation mechanism in Al-rich TiAl
Show all
Papers (846):
-
Asli Gunay Bulutsuz, Buse Gulec, Ozkan Gokcekaya, Johannes Gardstam, Takayoshi Nakano, Hakan Yilmazer. An investigation over microstructure and HIP processing effects on wear performance of pure chromium parts fabricated by laser powder bed fusion. International Journal of Refractory Metals and Hard Materials. 2024. 120
-
Jun Wang, Takuya Ishimoto, Tadaaki Matsuzaka, Aira Matsugaki, Ryosuke Ozasa, Takuya Matsumoto, Mikako Hayashi, Hyoung Seop Kim, Takayoshi Nakano. Adaptive enhancement of apatite crystal orientation and Young's modulus under elevated load in rat ulnar cortical bone. Bone. 2024. 181
-
Qiang Li, Qizhen Peng, Qi Huang, Mitsuo Niinomi, Takuya Ishimoto, Takayoshi Nakano. Development and characterizations of low-modulus Ti-Nb-Cu alloys with enhanced antibacterial activities. Materials Today Communications. 2024. 38
-
Qiang Li, Shuaishuai Li, Hao Sun, Mitsuo Niinomi, Takayoshi Nakano. Preparation and characterizations of antibacterial iodine-containing coatings on pure Ti. Journal of the Mechanical Behavior of Biomedical Materials. 2024. 151
-
Ming Li, Qiang Li, Jiawei Yang, Mitsuo Niinomi, Takayoshi Nakano. Preparation and antibacterial activity of Zn coating on pure Ti with enhanced adhesion. Materials Today Communications. 2024. 38
more...
MISC (802):
-
中野貴由, 石本卓也, 石本卓也, 松垣あいら, 小笹良輔, GOKCEKAYA Ozkan, 安田弘行, 趙研, 小泉雄一郎, 奥川将行, et al. Custom Mechano-Functional Control by Formation of Specific Interfaces via Metal 3D Printing-Learning from Hierarchical Anisotropic Architecture in Bone. まてりあ(Web). 2024. 63. 1
-
中野 貴由, 石本 卓也, 松垣 あいら, 小笹 良輔, ゴクチェカヤ オズカン, 安田 弘行, 趙 研, 小泉 雄一郎, 奥川 将行, 吉矢 真人, et al. 金属3Dプリンティングの特異界面形成によるカスタム力学機能制御学の構築 : 階層化異方性骨組織に学びつつ-Custom Mechano-Functional Control by Formation of Specific Interfaces via Metal 3D Printing : Learning from Hierarchical Anisotropic Architecture in Bone-特集 ナノスケール動的挙動の理解に基づく力学特性発現機構の解明(2). まてりあ = Materia Japan. 2024. 63. 1. 36-41
-
小泉 雄一郎, 奥川 将行, 柳 玉恒, 中野 貴由. 金属AMのデジタルツイン科学と超温度場材料創成学. 日本溶射学会誌 溶射. 2023. 60. 1. 11-24
-
小笹良輔, 森石武史, 小守壽文, 中野貴由. 血清中オステオカルシン濃度が骨アパタイト配向性に及ぼす影響. 日本骨形態計測学会雑誌. 2023. 33. 1
-
Takuya Ishimoto, Takayoshi Nakano. Review®Microstructural Control and Functional Enhancement of Light Metal Materials via Metal Additive Manufacturing+1. Materials Transactions. 2023. 64. 1. 10-16
more...
Patents (36):
Books (68):
-
チタンの基礎と応用
内田老鶴圃 2023 ISBN:9784753651122
-
デジタル化時代のAdditive Manufacturingの基礎と応用 (第2版)
2023
-
デジタル化時代のAdditive Manufacturingの基礎と応用
2022
-
金属3Dプリンタの医療デバイスへの応用、バイオ3Dプリント関連技術の開発と応用
シーエムシー出版 2019
-
無機/有機材料の表面処理・改質による生体適合性付与
シーエムシー出版 2019
more...
Lectures and oral presentations (149):
-
種々の力学的環境での椎体内骨梁の荷重支持機能の可視化
(日本機械学会 M&M2010 材料力学カンファレンス 2010)
-
電子ビーム造形法による生体機能化チタン基インプラント用材料の作製
(日本金属学会2010年秋期(第147回)講演大会 日本鉄鋼協会との共同セッション 2010)
-
すべり線導入により表面段差を制御したTi単結晶基板上での細胞配向化制御
(日本金属学会2010年秋期(第147回)講演大会 2010)
-
コラーゲン基板上での骨芽細胞による石灰化挙動
(日本金属学会2010年秋期(第147回)講演大会 2010)
-
電子ビーム造形法による構造体の力学特性の電子ビーム走査速度依存性
(日本金属学会2010年秋期(第147回)講演大会 2010)
more...
Works (34):
-
地域イノベーション創出総合支援事業 重点地域研究開発推進プログラム「シーズ発掘試験」
2009 -
-
層状組織制御TiAl結晶の異方性孔導入による力学特性制御
2009 -
-
Ti合金粉末電子線造形法による生体インプラント開発
2008 -
-
骨誘導可能な指向性ポーラス型ステンレス鋼インプラントの開発
2007 -
-
新骨質評価システム
2006 -
more...
Education (4):
- - 1992 Osaka University
- - 1992 Osaka University Granduate School of Engineering Department of Materials Science and Engineering
- - 1990 Osaka University School of Engineering
- - 1990 Osaka University Faculty of Engineering Department of Materials Science and Engineering
Professional career (1):
Work history (10):
- 2020/04 - 現在 大阪大学工学研究科附属異方性カスタム設計・AM研究開発センター 教授・センター長
- 2017/04 - 現在 Osaka Prefecture University
- 2017/04 - 現在 Osaka University Distiguished Professor
- 2008/04 - 現在 Osaka University Division of Materials & Manufacturing Science, Graduate School of Engineering Professor (full)
- 1999 - 2001 Osaka University
- 1999 - 2001 Osaka University, Assistant Professor
- 2001 - - 大阪大学 助教授
- 2001 - - Osaka University, Associate Professor
- 1992 - 1999 Osaka University
- 1992 - 1999 Osaka University, Research Associate
Show all
Committee career (17):
- 2023/10 - 現在 日本学術会議 会員
- 2023/06 - 現在 日本MRS 理事・副会長
- 2019/10 - 現在 日本骨代謝学会 評議員
- 2018/05 - 現在 一般財団法人 スマートプロセス学会 理事
- 2017/10 - 現在 日本学術会議 連携会員(24期・25期)
- - 現在 一般財団法人 骨代謝学会 あり方委員会委員
- - 現在 日本骨形態計測学会 理事
- - 現在 日本バイオマテリアル学会 常任理事
- 2021/04 - 2023/04 Institute of Metals and Materials President
- 2018/04 - 2020/04 Institute of Metals and Materials Vice president
- 2017/06 - 2017/06 日本骨形態計測学会 会長
- 2005 - 日本金属学会 第4分科材料戦略委員
- バイオマテリアル学会 正会員
- 日本MRS理事
- 日本骨形態計測学会 評議員
- 日本バイオマテリアル学会 評議員
- 日本金属学会 第4分科会(生体・福祉材料)運営委員(幹事)
Show all
Awards (60):
- 2023/11 - (公財)谷川熱技術振興基金 粉生熱技術振興賞 高温耐熱材料の塑性変形機構の解明と金属3Dプリンティングによる新展開
- 2023/09 - (公社)日本金属学会 第46回技術開発賞 骨基質配向化誘導を可能としたTi合金製脊椎固定用デバイス(UNIOS PLスペーサ-)の開発と製品化
- 2023/06 - 一般社団法人 粉体粉末協会 技術進歩賞
- 2023/04 - The Ichimura Prize in Science for Distinguished Achivement
- 2022/05 - 一般社団法人 軽金属学会 軽金属功績賞
- 2021/11 - 本多記念会 本多フロンティア賞
- 2021/09 - JIM The Japan Institute of Metals and Materials The Metals Best Poster Award
- 2021/09 - JIM Materia Japan Award
- 2021/09 - JIM The Japan Institute of Metals and Materials The Best Paper Award
- 2021/06 - 一般社団法人 粉体粉末冶金協会 (一社)紛体粉末冶金協会研究功績賞 金属三次元積層造形をはじめとする粉体粉末冶金学を基軸にした異方性材料組織制御に関する研究開発
- 2021/03 - The Japan Institute of Metals and Materials The Japan Institute of Metals and Materials Masumoto Hakaru Award
- 2020/04 - 文部科学省 令和2年度文部科学大臣表彰・科学技術賞(研究部門) 「異方性の材料科学に関する研究」に対して
- 2019/10 - 日本骨代謝学会 第37回日本骨代謝学会学術賞(基礎系)
- 2019/03 - (公益社団法人)日本金属学会 第58回日本金属学会 谷川・ハリス賞 異方性を基軸にした耐熱性金属間化合物の塑性挙動解明と生体材料への展開に関する研究
- 2012/09 - 日本金属学会 第60回日本金属学会論文賞(力学物性部門 ) Plastic Deformation Behavior of Mg12ZnY LPSO-Phase with 14H-Typed Structure
- 2012/06 - 日本歯科理工学会 第59回日本歯科理工学会学術講演会発表優秀賞 「下顎骨におけるアパタイト配向性の支配因子の解明」に対して
- 2012/02 - JSPS JSPS AWARD
- 2011 - 日本鉄鋼協会・日本金属学会関西支部 材料物性工学談話会優秀ポスター賞
- 2010 - 日本鉄鋼協会・日本金属学会関西支部 材料開発研究会ポスターセッション 研究発表優秀賞
- 2010 - 2010年日本金属学会秋期講演大会ポスターセッション「第15回日本金属学会優秀ポスター賞」
- 2010 - グローバルCOEプログラム「構造・機能先進材料デザイン教育研究拠点」平成21年度成果報告会優秀ポスター賞
- 2009 - 材料物性工学談話会平成21年度ポスター発表会 優秀ポスター賞
- 2009 - (社)日本鉄鋼協会・(社)日本金属学会関西支部 材料物性工学談話会平成21年度ポスター発表会 「優秀ポスター賞」
- 2009 - (社)日本鉄鋼協会・(社)日本金属学会関西支部 材料開発研究会ポスターセッション 「研究発表優秀賞」
- 2009 - 第29回骨形態計測学会、ゴールデンリボン賞
- 2009 - 第29回骨形態計測学会 学術奨励賞
- 2009 - グローバルCOEプログラム「構造・機能先進材料デザイン教育研究拠点」論文賞
- 2008 - 2008年日本金属学会秋期講演大会ポスターセッション、第11回「優秀ポスター賞」「一方向性孔導入によるTi3AI単結晶の塑性挙動制御」
- 2008 - 2008年日本金属学会秋期講演大会ポスターセッション第11回「優秀ポスター賞」 「変形モード制御によるポーラス材料の新たな可能性」
- 2008 - 2008年日本金属学会秋期公園大会ポスターセッション第11回「優秀ポスター賞」 「AgO及びCuO天下メカニカルミリングによるβ-FeSi2焼結体の作製と熱電特性の評価」
- 2008 - グローバルCOEプログラム「構造・機能先進材料デザイン教育研究拠点の形成」第一回シンポジウム優秀ポスター賞
- 2008 - 大阪大学論文100選(2007-2008)
- 2007 - 平成19年度日本金属学会・鉄鋼協会関西支部材料開発研究会優秀ポスター賞
- 2007 - 大阪大学論文100選(2006-2007)
- 2007 - 「全国歯科大学・歯学部付属病院新療放射線技師連絡協議会第18回研修会教育講演」感謝状
- 2007 - 第65回日本金属学会功績賞,力学特性部門
- 2007 - 21世紀COEプログラム「構造・機能先進材料デザイン研究拠点の形成」第五回シンポジウム最優秀ポスター賞
- 2006 - 日本バイオマテリアル学会賞(科学奨励賞)
- 2006 - 大阪大学論文100選(2005-2006)
- 2006 - The 16th International Microscopy Congress,Micrograph Competition 3rd Award
- 2006 - 第26回日本骨形態計測学会 学会賞
- 2006 - 21世紀COEプログラム「構造・機能先進材料デザイン研究拠点の形成」第四回シンポジウム最優秀ポスター賞
- 2005 - 平成17年度日本金属学会・鉄鋼協会関西支部材料開発研究会優秀ポスター賞
- 2005 - 大阪大学論文100選 (Graphics Selection)(2004-2005)
- 2005 - 「口腔顔面頭蓋再生研究国際シンポジウム、シンポジウム講演」感謝状
- 2005 - Ribbon Award (MRS論文賞)
- 2005 - 第2回日本金属学会村上奨励賞
- 2004 - 第22回日本骨代謝学会感謝状
- 2004 - 材料開発研究会最優秀ポスター賞「再生材料の開発と材料学的評価」
- 2004 - 平成16年度日本金属学会・鉄鋼協会関西支部材料開発研究会最優秀ポスター賞
- 2004 - 第22回日本骨代謝学会感謝状
- 2004 - 日本金属学会金属写真奨励賞(B部門)
- 2003 - 大阪大学論文100選(2002-2003)
- 2002 - 大阪大学論文100選(2001-2002)
- 2000 - MRS Fall Meeting Best Poster Award
- 2000 - Best poster award in Symposium N(Intermetallics)
- 1998 - MRS Fall Meeting Best Poster Award
- 1998 - 本多記念研究奨励賞
- 1996 - 日本金属学会奨励賞
- 1993 - 日本鉄鋼協会澤村論文賞
Show all
Association Membership(s) (16):
日本生体医工学会
, 日本骨形態計測学会
, 日本材料学会
, 粉体粉末冶金協会
, NPO日本歯科保存学会
, 日本再生医療学会
, (社)軽金属学会
, 日本再生炎症学会
, 日本結晶成長学会
, 日本骨代謝学会
, バイオマテリアル学会
, Materials and Minerals Society(TMS)
, The Metals
, Materials Reseach Society
, 日本鉄鋼協会
, 日本金属学会
Return to Previous Page