Research theme for competitive and other funds (5)：
2019 - 2022 Elucidation of Ultrafine Bubble Collapse Dynamics and Applications to Mechanical Manufacturing
2018 - 2021 Development of ultrasonic-assisted cutting for gradient wettability in a one-pass process and three-dimensional contact angle analysis
2016 - 2019 Investigation of CMP Mechanism of GaN Wafer and Development of High-Efficiency & High-Quality CMP Machine using Fixed Abrasive Tape
2013 - 2016 Development of Femtosecond-Laser-Induced Nanostrucuring on Glass Surface
2013 - 2015 Fast fabrication of fine functional surface with ultrasonic-assisted machining process
Papers (114)：
Masayoshi MIZUTANI, Yoshifumi TAKASU, Keita SHIMADA, Tsunemoto KURIYAGAWA. 表面改質を利用した単結晶窒化ガリウム (GaN) 基板の高速・低ダメージ加工. Journal of the Japan Society for Precision Engineering. 2023. 89. 5. 368-372
Chieko Kuji, Masayoshi Mizutani, Kana Takenaka, Keita Shimada, Toyohiko J. Konno, Hitoshi Soyama, Tsunemoto Kuriyagawa. Effect of local heating by ultrashort pulsed laser on Fe-Si-B-Cr amorphous alloys and its influence on blanking machinability. Precision Engineering. 2023. 81. 135-144
Masashi Yamanaka, Keita Shimada. Relation between Tensile Strength and Annealing Temperature for High Purity Niobium. IEEE Transactions on Applied Superconductivity. 2023. 1-5
Chieko Kuji, Masayoshi Mizutani, Kana Takenaka, Keita Shimada, Toyohiko J. Konno, A. Toshimitsu Yokobori, Tsunemoto Kuriyagawa. Relationship between blanking performance and microstructure of annealed Fe-Si-B-Cr amorphous alloy sheets. Precision Engineering. 2023
Micro and nano fabrication technology
Springer 2018 ISBN:9789811300974
Lectures and oral presentations (79)：
Manufacture of Niobium Superconducting RF Cavities with Cold Spray
(2023)
A Novel Manufacture of Niobium SRF Cavities by Cold Spray
(20th Annual Meeting of Particle Accelerator Society of Japan 2023)
A Novel Manufacture of Niobium SRF Cavities by Cold Spray
(21st International Conference on Radio-Frequency Superconductivity (SRF2023) 2023)
Relation between tensile strength and annealing temperature for high purity niobium
(19th Annual Meeting of Particle Accelerator Society of Japan 2022)
Degradation and recovery of RRR by vacuum annealing for high purity niobium
(19th Annual Meeting of Particle Accelerator Society of Japan 2022)
2010 - 2012 Tohoku University Graduate School of Engineering Department of Mechanical Systems and Design
2009 - 2010 Tohoku University Graduate School of Engineering Department of Nanomechanics
2007 - 2009 Tohoku University Graduate School of Engineering Department of Nanomecanics
2004 - 2007 Tohoku University School of Engineering Department of Mechanical and Aerospace Engineering
Professional career (1)：
(工学) (Tohoku University)
Work history (5)：
2023/06 - 現在 Nihon University College of Engineering Department of Mechanical Engineering Associate Professor
2023/04 - 2023/06 Nihon University College of Engineering Associate Professor
2021/04 - 2023/03 KEK Assistant Professor
2016/04 - 2021/03 Tohoku University Graduate School of Engineering Department of Mechanical Systems Engineering Assistant Professor
2012/04 - 2016/03 Tohoku University Graduate School of Engineering Department of Mechanical Systems and Design Assistant Professor
Committee career (5)：
2021/04 - 現在 Japan Society of Abrasive Techology Journal editorial board
2019/12 - 現在 International Committee of Abrasive Technology Associate Member
2016/04 - 2022/03 The Japan Society for Precision Engineering Affiliate Committee
2018/04 - 2021/03 The Japan Society for Precision Engineering Journal editorial board
2015/04 - 2015/09 2015年度精密工学会秋季大会実行委員会 大会実行委員
Awards (22)：
2022/03 - The Japan Society for Precision Engineering JSPE Numata Memorial Paper Award Control of short-pulsed laser induced periodic surface structures with machining -picosecond laser nanotexturing with magnetic abrasive finishing-
2021/12 - 2021年度 FA財団論文賞
2021/03 - Paper Award in 2020, Japan Society of Abrasive Technology
2019/09 - Japan Society of Precision Engineering JSPE Young Researcher Award
2019/09 - The Organizing Committee of the 15th CJUMP Excellent Paper Award Award for the paper titled "Micrometer-scaled Hierarchical Structures Fabricated by Ultrasonic-assisted Cutting"
2019/08 - Japan Society for Abrasive Technology JSAT Young Researcher Award
2018/11 - Japan Machine Tool Builders' Association Excellent Poster Award The exploration of the frontiers of metal additive manufacturing -High value manufacturing by creating functional interface
