Huang W., Tsuchida T., Yan J. Surface morphology formation and subsurface microstructure evolution of zirconia in ultrasonic vibration-assisted burnishing. Journal of Materials Processing Technology. 2024. 333
Qian Y., Hong J., Jiang M., Zhang Z., Huang H., Yan J. Influence of crystallinity on micro-nano structure response of Zr-based alloys treated by nanosecond laser. Optics and Lasers in Engineering. 2024. 183
Zhang H., Wang C., Huang H., Yan J., Zhang L., Jiang M., Zhang Z. Achieving ultra-low wear of Ti6Al4V alloy by introducing a sinusoidal nitriding layer via nanosecond pulsed laser irradiation. Tribology International. 2024. 200
An H., Qian Y., Zhang Z., Huang H., Yan J. Abnormal wetting behavior transformation in RB-SiC composite induced by laser irradiation and annealing treatment. Chemical Engineering Journal. 2024. 499
Tian Y., Ma Z., Ma X., Li L., Yan J. A cross-scale material removal prediction model for magnetorheological shear thickening polishing. Journal of Materials Processing Technology. 2024. 332
Advanced Ceramic Coatings: Fundamentals, Manufacturing, and Classification, R. K. Gupta, A. Motallebzadeh, S. Kakooei, T. A. Nguyen, A. Behera (eds.)
Elsevier B. V. 2023 ISBN:9780323996594
Electrical discharge coating with quarry dust powder suspension
Advanced Ceramic Coatings: Fundamentals, Manufacturing, and Classification 2023 ISBN:9780323996600
Multidisciplinary Science in Micro/Nanoscale Manufacturing
Elsevier B.V. 2020
Special Issue on Multidisciplinary Science in Micro/nanoscale Manufacturing
Elsevier B.V. 2020
Tool Dynamics-induced Surface Topography Error in Fast Tool Servo-Based Diamond Turning of Micro Dome Arrays
(7th CIRP CSI Conference on Surface Integrity 2024)
Influences of tool tip geometry on surface/subsurface damage formation in nanoscratching of single-crystal 4H-SiC
(7th CIRP CSI Conference on Surface Integrity 2024)
Scale-bridging surface structuring for functional performance improvement of components
(7th CIRP CSI Conference on Surface Integrity 2024)
Ultraprecision manufacturing for small optics
(Nanotechnology and Precision Engineering (NPE) International Series Forum)
2024/04 - 日本機械学会 日本機械学会賞(論文) Optimization of fast tool servo diamond turning for enhancing geometrical accuracy and surface quality of freeform optics
2024/01 - International Journal of Extreme Manufacturing (IJEM), IoP publishing IJEM Best Editor Award
2023/03 - International Journal of Extreme Manufacturing (IJEM), IoP publishing 2022 IJEM Best Paper Award Tool path generation and optimization for freeform surface diamond turning based on an independently controlled fast tool servo
2023/03 - 精密工学会 精密工学会論文賞 Flexible fabrication of Fresnel micro-lens array by off-spindle-axis diamond turning and precision glass molding
2021/06/07 - 工作機械技術振興財団 工作機械技術振興賞(論文賞) Measurement and Compensation of Tool Contour Error Using White Light Interferometry for Ultra-Precision Diamond Turning of Freeform Surfaces
2021/06 - 工作機械技術振興財団 工作機械技術振興賞(論文賞) Measurement and Compensation of Tool Contour Error Using White Light Interferometry for Ultra-Precision Diamond Turning of Freeform Surfaces
2020/10/18 - International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2020) PRESM2020 Best Paper Award Response of Resin Coating Films Containing Fine Metal Particles to Ultrashort Laser Pulses
2020/10/16 - International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2020) PRESM2020 Best Paper Award Response of Resin Coating Films Containing Fine Metal Particles to Ultrashort Laser Pulses
2020/10 - International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2020) PRESM2020 Best Paper Award Response of Resin Coating Films Containing Fine Metal Particles to Ultrashort Laser Pulses
2020/09/16 - International Journal of Extreme Manufacturing (IJEM), IoP publishing Outstanding Paper Award Manufacturing technologies toward extreme precision
2020/09 - International Journal of Extreme Manufacturing (IJEM), IoP publishing Outstanding Paper Award Manufacturing technologies toward extreme precision
2019/11/14 - The 8th International Conference of ASPEN ASPEN2019 Best Paper Award Chatter suppression in ultra-precision cutting of thin material substrates
2019/11 - The 8th International Conference of ASPEN ASPEN2019 Best Paper Award Chatter suppression in ultra-precision cutting of thin material substrates
2018/07/13 - CIRP CSI 2018 CIRP CSI 2018 Best Paper Award Investigation of Subsurface Damage Behaviors in Single-crystal Ge by Multi-cyclic Nanoindentation
2018/07 - CIRP CSI 2018 CIRP CSI 2018 Best Paper Award Investigation of Subsurface Damage Behaviors in Single-crystal Ge by Multi-cyclic Nanoindentation
2018/03/16 - 精密工学会 精密工学会高城賞 Mechanisms of material removal and subsurface damage in fixed-abrasive diamond wire slicing of single-crystalline silicon
2018/03 - 精密工学会 精密工学会高城賞 Mechanisms of material removal and subsurface damage in fixed-abrasive diamond wire slicing of single-crystalline silicon
2017/11/15 - 日本機械学会生産加工・工作機械部門 日本機械学会生産加工・工作機械部門優秀講演論文表彰 Healing of micro-cracks in optical glass using a pulsed laser
2017/11 - 日本機械学会生産加工・工作機械部門 日本機械学会生産加工・工作機械部門優秀講演論文表彰 Healing of micro-cracks in optical glass using a pulsed laser
2017/10/16 - Industrial Technology Research Institute ITRI Best Paper Award Diamond turning of high-precision roll-to-roll imprinting molds for fabricating subwavelength gratings
2017/10 - Industrial Technology Research Institute ITRI Best Paper Award Diamond turning of high-precision roll-to-roll imprinting molds for fabricating subwavelength gratings
2010/03/04 - 精密工学会 精密工学会論文賞 Fundamental investigation on subsurface damage in single crystalline silicon caused by diamond machining
2010/03 - 精密工学会 精密工学会論文賞 Fundamental investigation on subsurface damage in single crystalline silicon caused by diamond machining
2009/12/03 - 日本機械学会生産加工・工作機械部門 日本機械学会生産加工・工作機械部門優秀講演論文表彰 Study on Nonisothermal Glass Molding Press for Aspherical Lens
2009/12 - 日本機械学会生産加工・工作機械部門 日本機械学会生産加工・工作機械部門優秀講演論文表彰 Study on Nonisothermal Glass Molding Press for Aspherical Lens
2009/11/12 - Asian Symposium for Precision Engineering and Nanotechnology ASPEN2009 President Prize Best Paper Award Numerical and Experimental Investigation on the Transferability of Ultraprecision Glass Molding Press for Microgrooves
2009/11 - Asian Symposium for Precision Engineering and Nanotechnology ASPEN2009 President Prize Best Paper Award Numerical and Experimental Investigation on the Transferability of Ultraprecision Glass Molding Press for Microgrooves
2003/05/23 - The 4th Int. Conf. on Intelligent Processing and Manufacturing of Materials Best Paper Award in Materials Processing Ductile Machining Phenomena of Nominally Brittle Materials at the Nanoscale
2003/05 - The 4th Int. Conf. on Intelligent Processing and Manufacturing of Materials Best Paper Award in Materials Processing Ductile Machining Phenomena of Nominally Brittle Materials at the Nanoscale
1998/04/01 - 日本機械学会生産加工・工作機械部門 日本機械学会生産加工・工作機械部門優秀講演論文賞 Tool Shape Effects on Diamond Cutting Process and Finished Surface Quality
1998/04 - 日本機械学会生産加工・工作機械部門 日本機械学会生産加工・工作機械部門優秀講演論文賞 Tool Shape Effects on Diamond Cutting Process and Finished Surface Quality
全件表示
所属学会 (10件)：
日本工学アカデミー
, The International Academy for Production Engineering (CIRP)
, 電気加工学会
, レーザ加工学会
, European Society for Precision Engineering and Nanotechnology (euspen)
, 応用物理学会
, 砥粒加工学会
, American Society for Precision Engineering (ASPE)
, 精密工学会
, 日本機械学会
