Matsusaka Souta

マツサカソウタ | Matsusaka Souta

Affiliation and department：
Job title： Chiba University

Research field (1)： Manufacturing and production engineering

Research keywords (4)： Glass , Surface modification , Welding and Joining , Materials processing

Research theme for competitive and other funds (8)：

Show all

Papers (101)：

Kumiko Murakami, Souta Matsusaka, Sho Itoh, Hirofumi Hidai, Mitsuru Kitaichi. Effect of bottom deformation on median crack repropagation after wheel scribing in glass. International Journal of Applied Glass Science. 2024
Shunta Fukushima, Hirofumi Hidai, Sho Itoh, Tetsuo Kishi, Souta Matsusaka. Structural changes in trajectories of platinum sphere migration via laser illumination. Journal of Non-Crystalline Solids. 2024. 631. 122918-122918
Sho Itoh, Naoto Nagano, Yusuke Kubota, Kohei Matsumoto, Masataka Sato, Souta Matsusaka, Hirofumi Hidai. Reaching Over 500 Mpa Maximum Flexural Strength in Ultra-Thin Glass Via Co2 Laser Fusion Cutting. 2024
Sho Itoh, Souta Matsusaka, Hirofumi Hidai, Kumiko Murakami, Mitsuru Kitaichi. Selective unidirectional median crack propagation in glass achieved by mechanical scribing. International Journal of Fracture. 2024
宮田歩武, 河野美優香, 川村拓史, 松坂壮太, 比田井洋史, 伊東翔. レーザ局所加熱を用いたガラス内銀析出物の形状制御. 精密工学会学術講演会講演論文集. 2023. 2023A. 463-464

ｍore...

MISC (42)：

Sakamoto Kosuke, Tokunaga Daijiro, Hirofumi Hidai, Itoh Sho, Omatsu Takashige, Koyama Koji, Seong-woo Kim, Souta Matsusaka. Crack propagation direction in diamond by laser illumination. Proc. 25he International Symposium on Advances in Abrasive Technology (ISAAT2023). 2023. ID1161
Sho Itoh, Naoto Nagano, Souta, Matsusaka, Hirofumi Hidai. Laser fusion cutting of ultra-thin glass (UTG) using a profile-controlled beam for residual stress reduction. Proc. Lim (Lasers in Manufacturing Conference). 2023
Sho Itoh, Naoto Nagano, Shun Obuchi, Souta Matsusaka, Hirofumi Hidai. Feasibility study on laser fusion cutting of ultra-thin glass (UTG) aimed for defect-free, molten edge formation. Proc. 9th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2022). 2022. 691-694
Daijiro Tokunaga, Hirofumi Hidai, Souta Matsusaka, Akira Chiba, Takashige Omatsu, Noboru Morita. Shape of the ultrashort-pulsed laser-modified region in diamonds. Proc. 23rd International Symposium on Advances in Abrasive Technology (ISAT2021). 2021. 375-378
Fumihiko Inagaki, Noboru Morita, Hirofumi Hidai, Souta Matsusaka, Tatsuo Ohmori, Akira Chiba, Yuichiro Matsumoto, Shinji Shimizu. Measurement and Evaluation of the Static Friction Coefficient Between Fixed Coupling Surfaces Under Face Contact and High Contact Pressure. Proc. Intl. Conf. on Leading Edge Manufacturing/Materials & Processing (LEMP2020). 2021. 8530

ｍore...

Patents (4)：

Lectures and oral presentations (119)：

ピコ秒レーザ光を用いたダイヤモンド内部の亀裂進展
(2023年度精密工学会秋季大会学術講演会 2023)
ガラス内の微小亀裂が誘導する銀析出現象の発見
(2023年度精密工学会秋季大会学術講演会 2023)
レーザ局所加熱を用いたガラス内銀析出物の形状制御
(2023年度精密工学会秋季大会学術講演会 2023)
ピコ秒パルスレーザ光を用いた{100}面でのダイヤモンドレーザスライシング
(2023年砥粒加工学会学術講演会 2023)
ガラス内メディアンクラック伸展現象の誘起とin-situ観察
(2023年砥粒加工学会学術講演会 2023)

ｍore...

Education (3)：

Professional career (1)：

Work history (5)：

2023/10 - 現在千葉大学大学院工学研究院教授
2015/04 - 2023/09 Chiba University Graduate school of Engineering Associate Professor
2007/04 - 2015/03 Chiba University Graduate school of Engineering Assistant Professor
2001/06 - 2007/03 Chiba University Faculty of Engineering Research Associate
1999/08 - 2001/05 JWRI, Osaka University Postdoctoral fellow

Committee career (5)：

Awards (8)：

Show all

Association Membership(s) (5)：

THE JAPAN SOCIETY OF MECHANICAL ENGINEERS , THE JAPAN INSTITUTE OF LIGHT METALS , THE JAPAN SOCIETY FOR ABRASIVE TECHNOLOGY , 精密工学会 , 溶接学会

※ Researcher’s information displayed in J-GLOBAL is based on the information registered in researchmap. For details, see here.

Return to Previous Page