Jiwang Yan | Researcher Information

2021 - 2024 SiC金型切削とナノ構造形成およびグラフェン成膜による高機能ガラス光学素子成形
2021 - 2023 レーザ照射によるSi-in-C複合ナノワイヤ生成と次世代Liイオン電池への応用
2020 - 2023 マイクロ・ナノ構造光学素子の大面積ガラス成形における原子スケールの界面制御
2017 - 2020 Ultraprecision forming of hybrid Fresnel lenses using infrared-transparent polymer and single-crystal silicon
2017 - 2019 Laser irradiation-induced micro pillar generation and its application to the fabrication of next-generation Li-ion battery

2015 - 2017 Ultra-high temperature nanoindentation by means of laser local heating

2014 - 2017 微細構造表面創成のための圧電駆動式その場ナノインデンテーションに関する研究

2014 - 2017 Ultraprecision cutting of single-crystal silicon using electrically conductive nano-crystal diamond tools under electromagnetic fields

2013 - 2015 Infrared Sintering of Waste Silicon Powder and Copper Particles for Composite Films for Next-Generation Lithium Ion Batteries

2011 - 2012 Subsurface damage recovery of single crystal silicon by ultra-short high-output flash lamp irradiation

2010 - 2012 Fabrication of ultraprecision aspherical molds on high-strengthmaterials by tool-swinging cutting with nanoparticle lubrication

2008 - 2009 高周波ナノ秒パルスレーザ照射による大口径シリコンウエハ加工変質層の完全修復

2007 - 2009 High-Accuracy Glass Molding Press for Ultrathin Fresnel Lenses

2006 - 2007 Development of high precision nano-particle jet deposition device and studies on deposition dynamics

2005 - 2006 先端LSIの高密度実装を可能にする金バンプ・レジスト薄膜の超精密切削平担化技術

2005 - 2006 INTERLAYER GROWTH AND SIMULATION OF JOINT STRENGTH OF DISSIMILAR METAL JOINT INTERFACE

2003 - 2004 単結晶フッ化カルシウムの超微細溝切削による高精度フレネルレンズの加工

2003 - 2004 STABILIZATION OF DRESSING PERFORMANCE OF ROTARY DIAMOND DRESSER BY MEANS OF ON-THE-MACHINE PROFILE CONDITIONING

2001 - 2002 単結晶シリコン製大口径赤外線非球面レンズの新しい超精密切削法の開発

1999 - 2000 DEVELOPMENT OF ELECTRORHEOLOGICAL FLUID ASSISTED ULTRA-PRECISION MICRO-MECHANICAL FABRICATION SYSTEM

Show all

Atef M.M, Khair-Eldeen W, Yan J, Nassef M.G.A. A nonlinear dynamic analysis of skidding behavior in rolling bearings using lubricant traction coefficients and cage flexibility. Tribology International. 2024. 197
Huang H, Tian X, Wang C, Yan J. Significant improvement in surface hardness of CrMnFeCoNi high entropy alloy via nanosecond pulse laser grain refinement. Vacuum. 2024. 226
Huang H, Xu P, Liu B, An H, Qian Y, Yan J. Surface quality and mechanical property evolution of laser nitrided Zr-based metallic glass induced by laser shock flattening. Vacuum. 2024. 224
Schulze V, Aurich J, Jawahir I.S, Karpuschewski B, Yan J. Surface conditioning in cutting and abrasive processes. CIRP Annals. 2024
Qian Y, Liu B, Hong J, Jiang M, Zhang Z, Zhang L, Huang H, Yan J. Simultaneous flattening and hardening of laser shock peened Zr-based metallic glass surface by nanosecond laser irradiation in a flowing nitrogen atmosphere. Journal of Materials Processing Technology. 2024. 326

ｍore...

HJ. Yan, HR. Laser polishing technologies for additive-manufactured metal products. Journal of the Japan Society for Abrasive Technology. 2023. 67. 8. 440-443
HJ. Yan, HR. Ultraprecision ductile mode machining of hard brittle materials. Journal of the Japan Society of Mechanical Engineers. 2022. 125. 1247. 11-14
HJ. Yan, HR. Ultrasonic vibration-assisted grinding of carbon-based difficult-to-cut materials. Journal of the Japan Society for Precision Engineering. 2022. 88. 7. 541-545
HJ. Yan, HR. Electrochemical Machining on an EDM Machine for Fine Finishing of Micro Grooves. Die and Mould Technology. 2022. 37. 4. 14-17
L Zhang, YY, Allen, J Yan. Flexible fabrication of fresnel micro-lens array by off-spindle-axis diamond turning and precision glass molding. Precision Engineering. 2022. 74. 186-194

ｍore...

Advanced Ceramic Coatings: Fundamentals, Manufacturing, and Classification, R. K. Gupta, A. Motallebzadeh, S. Kakooei, T. A. Nguyen, A. Behera (eds.)
Elsevier B. V. 2023 ISBN:9780323996594
Electrical discharge coating with quarry dust powder suspension
Advanced Ceramic Coatings: Fundamentals, Manufacturing, and Classification 2023 ISBN:9780323996600
Multidisciplinary Science in Micro/Nanoscale Manufacturing
Elsevier B.V. 2020
Special Issue on Multidisciplinary Science in Micro/nanoscale Manufacturing
Elsevier B.V. 2020
Recent Developments of Silicon Anodes for Lithium Ion Batteries
CMC Publishing CO., LTD. 2019 ISBN:9784781314853

ｍore...

Tool Dynamics-induced Surface Topography Error in Fast Tool Servo-Based Diamond Turning of Micro Dome Arrays
(7th CIRP CSI Conference on Surface Integrity 2024)
Influences of tool tip geometry on surface/subsurface damage formation in nanoscratching of single-crystal 4H-SiC
(7th CIRP CSI Conference on Surface Integrity 2024)
Scale-bridging surface structuring for functional performance improvement of components
(7th CIRP CSI Conference on Surface Integrity 2024)
Ultraprecision manufacturing for small optics
(Nanotechnology and Precision Engineering (NPE) International Series Forum)
色収差共焦点プローブを用いたオンマシン計測システムの構築
(精密工学会第31回学生会員卒業研究発表講演会)

ｍore...

2000 - 2000 Tohoku University Graduate School, Division of Engineering Department of Mechatronics and Precision Engineering
2000 - Tohoku University Graduate School, Division of Engineering Department of Mechatronics and Precision Engineering
1996 - 1996 Tsinghua University Graduate School, Division of Engineering Department of Precision Instruments and Mechanology
1994 - 1994 Jilin University Graduate School, Division of Engineering Department of Mechanical Engineering
1991 - 1991 Jilin University Faculty of Engineering Department of Mechanical Engineering

Ph.D. (Tohoku University)

2012/04 - 現在 Professor, Keio University, Faculty of Science and Technology
2017/09 - 2024/01 Specially Appointed Professor, Tokyo Institute of Technology
2018/07 - 2019/03 Leverhulme Visiting Professor, Manchester University, UK
2018/07 - 2019/03 Visiting Professor, Manchester University, UK
2014/04 - 2015/03 Adjunct Part-time Professor, The Uiniversity of Tokyo

Show all

2024/01 - 現在 Journal of Materials Processing Technology Associate Editor
2022/05 - 現在 Japan Society of Laser Technology (JSLT) Director
2022/03 - 現在 Japan Society of Precision Engineering (JSPE) Director, Executive Director, Chairman of Publication Sector, Chairman of Journal Review Board
2019/04 - 現在日本機械学会 JSME Journal Editorial Commitee Member
2019/04 - 現在日本機械学会日本機械学会学術誌編修部会委員

2019/04 - 現在日本機械学会学術誌編修部会委員

2019/01 - 現在 International Journal of Extreme Manufacturing Editorial Board Member

2018/04 - 現在 Journal of Micromanufacturing Editorial Board Member

2018/03 - 現在 International Journal of Machine Tools and Manufacture Editorial Board Member

2017/06 - 現在 Nanomanufacturing and Metrology Editorial Board Member

2017/04 - 現在 The Japan Society of Mechanical Engineers Steering Committee Member of Manufacturing & Machine Tool Division

2017/04 - 現在 The Japan Society of Mechanical Engineers Council Member of Kantou Branch

2017/04 - 現在 The International Institution for Micro Manufacturing Member

2017/04 - 現在 International Forum for Micro Manufacturing (IFMM) Executive Committee Member

2017/04 - 現在 The International Institution for Micro Manufacturing Member

2017/04 - 現在 International Forum for Micro Manufacturing (IFMM) Executive Committee Member

2017/04 - 現在 The International Institution for Micro Manufacturing Member

2017/04 - 現在日本機械学会関東支部商議員

2017/04 - 現在 International Forum for Micro Manufacturing (IFMM) Executive Committee Member

2016/11 - 現在 Applied Sciences Editorial Board Member

2015/01 - 現在 International Journal of Additive and Subtractive Materials Manufacturing Editorial Board Member

2013/09 - 現在 International Journal of Mechatronics and Manufacturing Systems Editorial Board Member

2013/04 - 現在 The Japan Society for the Promotion of Science (JSPS) Member of the 145th Committee

2013/04 - 現在日本学術振興会第145委員会委員

2013/01 - 現在 International Journal of Materials Forming and Machining Processes Associate Editor

2012/01 - 現在精密工学会代議員

2011/01 - 現在 Optics and Precision Engineering Editorial Board Member

2009/01 - 現在 International Journal of Manufacturing, Materials and Mechanical Engineering International Editorial Review Board Member

2008/02 - 現在 Journal of Manufacturing Technology Research Editorial Board Member

2006/09 - 現在 International Committee for Abrasive Technology Active Member

2005/10 - 現在 International Journal of Machining and Machinability of Materials Editorial Board Member

2004/04 - 現在 The Japan Society for Precision Engineering Nano-Precision Mechanical Manufacturing Committee Member

2004/04 - 現在精密工学会ナノ精度機械加工専門委員会委員

2016/11 - 2024/03 Applied Sciences Editorial Board Member

2019/04 - 2022/03 日本機械学会 Journal Editorial Commitee Member

2012/01 - 2022/03 The Japan Society for Precision Engineering Representative

2015/01 - 2021/12 International Journal of Additive and Subtractive Materials Manufacturing Editorial Board Member

2013/09 - 2021/06 International Journal of Mechatronics and Manufacturing Systems Editorial Board Member

2013/01 - 2020/12 International Journal of Materials Forming and Machining Processes Associate Editor

2017/04 - 2019/03 日本機械学会生産加工・工作機械部門運営委員

2017/04 - 2019/03 日本機械学会関東支部商議員

2017/04 - 2019/03 日本機械学会生産加工・工作機械部門運営委員

2017/04 - 2019/03 The Japan Society of Mechanical Engineers Steering Committee Member of Manufacturing & Machine Tool Division

2017/04 - 2019/03 The Japan Society of Mechanical Engineers Council Member of Kantou Branch

2012/02 - 2017/07 Dataset Papers in Science: Condensed Matter Physics Editorial Board Member

2013/04 - 2017/03 The Japan Society for Abrasive Technology Vice Chairman of International Committee

2013/04 - 2017/03 砥粒加工学会国際副委員長

2008/04 - 2016/12 International Journal of Computational Materials Science and Surface Engineering Editorial Board Member

2014/04 - 2016/09 The Japan Society for Precision Engineering Member of Award Recommendation Committee

2014/04 - 2016/09 精密工学会学会賞推薦委員会委員

2013/04 - 2015/03 砥粒加工学会理事

2013/04 - 2015/03 The Japan Society for Abrasive Technology Board Member

2014/09 - 2014/09 The 17th International Symposium on Advances in Abrasive Technology (ISAAT2014) Chairman of Scientific Committee

2014/09 - The 17th International Symposium on Advances in Abrasive Technology (ISAAT2014) Chairman of Scientific Committee

2011/04 - 2013/03 The Japan Society for Abrasive Technology Award Nomination Committee Member

2011/04 - 2013/03 砥粒加工学会学会賞審査委員会委員

2009/04 - 2013/03 The Japan Society for Abrasive Technology Manager of Paper Review Committee

2009/04 - 2013/03 砥粒加工学会校閲委員会幹事

2008/05 - 2012/04 Rio’s International Journal on Sciences of Industrial and Systems Engineering and Management Associate Member of Scientific Council

2009/04 - 2012/03 The Japan Society for Precision Engineering Micro-Machining & Surface Function Committee Member

2009/04 - 2012/03 精密工学会微細加工と表面機能委員会委員

2006/04 - 2012/03 The Japan Society for Precision Engineering Council Member & Manager of Tohoku Branch

2006/04 - 2012/03 精密工学会東北支部商議員・幹事

2009/04 - 2010/03 The Japan Society of Mechanical Engineers Representative of Manufacturing & Machine Tool Division

2009/04 - 2010/03 日本機械学会生産加工・工作機械部門代議員

2007/04 - 2010/03 The Japan Society for Precision Engineering Paper Review Committee Member

2007/04 - 2010/03 精密工学会校閲委員会委員

2006/04 - 2010/03 The Japan Society for Precision Engineering Member of Public Information Committee

2006/04 - 2010/03 精密工学会広報情報委員会委員

2005/04 - 2010/03 The Japan Society for Abrasive Technology International Committee Member

2006/04 - 2009/03 International Journal of Nano Manufacturing Editorial Board Member

2005/04 - 2008/03 The Japan Society for Abrasive Technology Editorial Committee Member

2006/04 - 2007/03 The Japan Society of Mechanical Engineers Journal Topics Committee Member

2006/04 - 2007/03 The Japan Society of Mechanical Engineers Paper Review Committee Member

2006/04 - 2007/03 The Japan Society of Mechanical Engineers Journal Topics Committee Member

2006/04 - 2007/03 The Japan Society of Mechanical Engineers Paper Review Committee Member

2006/04 - 2007/03 日本機械学会学会誌トピックス委員

2006/04 - 2007/03 日本機械学会校閲委員会委員

2004/04 - 2006/03 The Japan Society of Mechanical Engineers Council Member of Hokkaido Branch

2004/04 - 2006/03 日本機械学会北海道支部商議員

2002/04 - 2004/03 The Japan Society for Precision Engineering Member of Committee for 21st Century Advanced Manufacturing Technologies

2002/04 - 2003/03 The Japan Society of Mechanical Engineers Adviser of Hokkaido Student Chapter

2002/04 - 2003/03 日本機械学会北海道学生会顧問

2000/04 - 2001/03 The Japan Society for Precision Engineering High-Speed and High-Precision Machining Committee Member

2000/04 - 2001/03 精密工学会加工の超高速化および超精密化に関する研究協力分科会委員

Show all

2024/04 - The Japan Society of Mechanical Engineers JSME Medal for Outstanding Paper Optimization of fast tool servo diamond turning for enhancing geometrical accuracy and surface quality of freeform optics
2024/01 - International Journal of Extreme Manufacturing (IJEM), IoP publishing IJEM Best Editor Award
2023/03 - International Journal of Extreme Manufacturing (IJEM), IoP publishing 2022 IJEM Best Paper Award Tool path generation and optimization for freeform surface diamond turning based on an independently controlled fast tool servo
2023/03 - The Japan Society for Precision Engineering JSPE Best Paper Award Flexible fabrication of Fresnel micro-lens array by off-spindle-axis diamond turning and precision glass molding
2021/06/07 - 工作機械技術振興財団 Machine Tool Technology Promotion Award 炭素拡散反応を用いた形彫り放電加工による多結晶ダイヤモンドの3次元形状創製

2021/06/07 - 工作機械技術振興財団 Machine Tool Technology Promotion Award Measurement and Compensation of Tool Contour Error Using White Light Interferometry for Ultra-Precision Diamond Turning of Freeform Surfaces

2021/06 - 工作機械技術振興財団 Machine Tool Technology Promotion Award Measurement and Compensation of Tool Contour Error Using White Light Interferometry for Ultra-Precision Diamond Turning of Freeform Surfaces

2021/06 - 工作機械技術振興財団 Machine Tool Technology Promotion Award 炭素拡散反応を用いた形彫り放電加工による多結晶ダイヤモンドの3次元形状創製

2021/04/22 - The Japan Society of Mechanical Engineers JSME Medal for Outstanding Paper Ultra-precision cutting of roll molds having two-directional wavy microstructures

2021/04 - The Japan Society of Mechanical Engineers JSME Medal for Outstanding Paper Ultra-precision cutting of roll molds having two-directional wavy microstructures

2020/10/18 - International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2020) PRESM2020 Best Paper Award Response of Resin Coating Films Containing Fine Metal Particles to Ultrashort Laser Pulses

2020/10/16 - International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2020) PRESM2020 Best Paper Award Response of Resin Coating Films Containing Fine Metal Particles to Ultrashort Laser Pulses

2020/10 - International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2020) PRESM2020 Best Paper Award Response of Resin Coating Films Containing Fine Metal Particles to Ultrashort Laser Pulses

2020/09/16 - International Journal of Extreme Manufacturing (IJEM), IoP publishing Outstanding Paper Award Manufacturing technologies toward extreme precision

2020/09 - International Journal of Extreme Manufacturing (IJEM), IoP publishing Outstanding Paper Award Manufacturing technologies toward extreme precision

2020/02/28 - Japan Society of Abrasive Technology JSAT Best Paper Award Fabrication of porous composite by high-pressure sintering of silicon cutting chips and metal particles

2020/02 - Japan Society of Abrasive Technology JSAT Best Paper Award Fabrication of porous composite by high-pressure sintering of silicon cutting chips and metal particles

2019/11/14 - The 8th International Conference of ASPEN ASPEN2019 Best Paper Award Chatter suppression in ultra-precision cutting of thin material substrates

2019/11 - The 8th International Conference of ASPEN ASPEN2019 Best Paper Award Chatter suppression in ultra-precision cutting of thin material substrates

2019/06/17 - 工作機械技術振興財団 Machine Tool Technology Promotion Award 同一電極による放電・電解複合加工の試み

2019/06 - 工作機械技術振興財団 Machine Tool Technology Promotion Award 同一電極による放電・電解複合加工の試み

2018/07/13 - CIRP CSI 2018 CIRP CSI 2018 Best Paper Award Investigation of Subsurface Damage Behaviors in Single-crystal Ge by Multi-cyclic Nanoindentation

2018/07 - CIRP CSI 2018 CIRP CSI 2018 Best Paper Award Investigation of Subsurface Damage Behaviors in Single-crystal Ge by Multi-cyclic Nanoindentation

2018/03/16 - 精密工学会 JSPE Takagi Award Mechanisms of material removal and subsurface damage in fixed-abrasive diamond wire slicing of single-crystalline silicon

2018/03 - 精密工学会 JSPE Takagi Award Mechanisms of material removal and subsurface damage in fixed-abrasive diamond wire slicing of single-crystalline silicon

2017/11/15 - 日本機械学会生産加工・工作機械部門 Best Paper Award, The 9th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), JSME Healing of micro-cracks in optical glass using a pulsed laser

2017/11 - 日本機械学会生産加工・工作機械部門 Best Paper Award, The 9th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), JSME Healing of micro-cracks in optical glass using a pulsed laser

2017/10/16 - Industrial Technology Research Institute ITRI Best Paper Award Diamond turning of high-precision roll-to-roll imprinting molds for fabricating subwavelength gratings

2017/10 - Industrial Technology Research Institute ITRI Best Paper Award Diamond turning of high-precision roll-to-roll imprinting molds for fabricating subwavelength gratings

2017/06/19 - 工作機械技術振興財団 Machine Tool Technology Promotion Award Electrical discharge machining and grinding of single-crystal silicon carbide using polycrystalline diamond

2017/06 - 工作機械技術振興財団 Machine Tool Technology Promotion Award Electrical discharge machining and grinding of single-crystal silicon carbide using polycrystalline diamond

2016/11/20 - The 17th International Machine Tool Engineers’ Conference The 17th IMEC Excellent Poster Award Fabrication of infrared microlens array by ultraprecision diamond turning of single-crystal silicon

2016/11 - The 17th International Machine Tool Engineers’ Conference The 17th IMEC Excellent Poster Award Fabrication of infrared microlens array by ultraprecision diamond turning of single-crystal silicon

2015/10/20 - 日本機械学会生産加工・工作機械部門 Best Paper Award, The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), JSME Press Molding of Si-HDPE Hybrid Lens Substrate for Infrared Optical Applications

2015/10 - 日本機械学会生産加工・工作機械部門 Best Paper Award, The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), JSME Press Molding of Si-HDPE Hybrid Lens Substrate for Infrared Optical Applications

2015/06/22 - 工作機械技術振興財団 Machine Tool Technology Promotion Award Ultraprecision fabrication of molds for microlens arrays by segment turning method

2015/06 - 工作機械技術振興財団 Machine Tool Technology Promotion Award Ultraprecision fabrication of molds for microlens arrays by segment turning method

2014/11/15 - 日本機械学会生産加工・工作機械部門 JSME Manufacturing and Machine Tool Award for Outstanding Presentation Study on laser recovery of wire saw-damaged poly-crystalline silicon wafers

2014/11 - 日本機械学会生産加工・工作機械部門 JSME Manufacturing and Machine Tool Award for Outstanding Presentation Study on laser recovery of wire saw-damaged poly-crystalline silicon wafers

2014/06/23 - 工作機械技術振興財団 Machine Tool Technology Promotion Award Micro EDM of Polycrystalline Diamond Using Cupronickel Rotary Electrode

2014/06 - 工作機械技術振興財団 Machine Tool Technology Promotion Award Micro EDM of Polycrystalline Diamond Using Cupronickel Rotary Electrode

2014/05/19 - スマートプロセス学会 Smart Processing Society Best Paper Award Control of TIG Arc Behavior by YAG Laser and Development of Laser Weaving Method

2014/05 - スマートプロセス学会 Smart Processing Society Best Paper Award Control of TIG Arc Behavior by YAG Laser and Development of Laser Weaving Method

2014/03/20 - 精密工学会2014年度春季大会実行委員会 JSPE Best Organizer Award Ultraprecision Micro Machining (OS)

2014/03 - 精密工学会2014年度春季大会実行委員会 JSPE Best Organizer Award Ultraprecision Micro Machining (OS)

2013/03/13 - 精密工学会2013年度春季大会実行委員会 JSPE Best Organizer Award Ultraprecision Micro Machining (OS)

2013/03 - 精密工学会2013年度春季大会実行委員会 JSPE Best Organizer Award Ultraprecision Micro Machining (OS)

2011/06/14 - 工作機械技術振興財団 Machine Tool Technology Promotion Award (Best Paper Award) Restoration of the retention force of a small-diameter thermoplastic resin-bonded wheel by laser treatment

2011/06 - 工作機械技術振興財団 Machine Tool Technology Promotion Award (Best Paper Award) Restoration of the retention force of a small-diameter thermoplastic resin-bonded wheel by laser treatment

2011/03/04 - 砥粒加工学会 JSAT Best Paper Award Restoration of the retention force of a small-diameter thermoplastic resin-bonded wheel by laser treatment

2011/03/04 - 砥粒加工学会 JSAT Kumagai Award Performance of the thermoplastic resin -bonded diamond wheel

2011/03 - 砥粒加工学会 JSAT Best Paper Award Restoration of the retention force of a small-diameter thermoplastic resin-bonded wheel by laser treatment

2011/03 - 砥粒加工学会 JSAT Kumagai Award Performance of the thermoplastic resin -bonded diamond wheel

2011/02/25 - NPO法人精密科学技術ネットワーク Iwaki Award Surface Processing of Machining-Damaged Single-Crystal Silicon by Nano-Second Pulsed Laser Irradiation

2011/02 - NPO法人精密科学技術ネットワーク Iwaki Award Surface Processing of Machining-Damaged Single-Crystal Silicon by Nano-Second Pulsed Laser Irradiation

2010/03/04 - 精密工学会 JSPE Best Paper Award Fundamental investigation on subsurface damage in single crystalline silicon caused by diamond machining

2010/03 - 精密工学会 JSPE Best Paper Award Fundamental investigation on subsurface damage in single crystalline silicon caused by diamond machining

2009/12/03 - 日本機械学会生産加工・工作機械部門 JSME Certificate of Merit for Outstanding Research Study on Nonisothermal Glass Molding Press for Aspherical Lens

2009/12 - 日本機械学会生産加工・工作機械部門 JSME Certificate of Merit for Outstanding Research Study on Nonisothermal Glass Molding Press for Aspherical Lens

2009/11/12 - Asian Symposium for Precision Engineering and Nanotechnology ASPEN2009 President Prize Best Paper Award Numerical and Experimental Investigation on the Transferability of Ultraprecision Glass Molding Press for Microgrooves

2009/11 - Asian Symposium for Precision Engineering and Nanotechnology ASPEN2009 President Prize Best Paper Award Numerical and Experimental Investigation on the Transferability of Ultraprecision Glass Molding Press for Microgrooves

2009/06/16 - 型技術協会 JSDMT Encouragement Award Interferential Metrology for High NA Aspherical Optical Elements

2009/06 - 型技術協会 JSDMT Encouragement Award Interferential Metrology for High NA Aspherical Optical Elements

2009/03/13 - 精密工学会2009年度春季大会実行委員会 JSPE Best Organizer Award Ultraprecision Machining and Metrology for Curved surface, Microstructure and Functional Materials (OS)

2009/03 - 精密工学会2009年度春季大会実行委員会 JSPE Best Organizer Award Ultraprecision Machining and Metrology for Curved surface, Microstructure and Functional Materials (OS)

2006/03/17 - 精密工学会2006年度春季大会実行委員会 JSPE Best Organizer Award Ultraprecision Machining and Metrology for Curved surface, Microstructure and Functional Materials (OS)

2006/03 - 精密工学会2006年度春季大会実行委員会 JSPE Best Organizer Award Ultraprecision Machining and Metrology for Curved surface, Microstructure and Functional Materials (OS)

2005/09/28 - 砥粒加工学会 JSAT Young Researcher Award Ultraprecision Cutting for Optical Components and Semiconductor Substrates

2005/09/17 - 精密工学会2005年度秋季大会実行委員会 JSPE Best Organizer Award Ultraprecision Machining and Metrology for Curved surface, Microstructure and Functional Materials (OS)

2005/09 - 精密工学会2005年度秋季大会実行委員会 JSPE Best Organizer Award Ultraprecision Machining and Metrology for Curved surface, Microstructure and Functional Materials (OS)

2005/09 - 砥粒加工学会 JSAT Young Researcher Award Ultraprecision Cutting for Optical Components and Semiconductor Substrates

2004/06/21 - 工作機械技術振興財団 Machine Tool Technology Promotion Award Precision Cutting of Tungsten Carbide using CVD Diamond Tools

2004/06 - 工作機械技術振興財団 Machine Tool Technology Promotion Award Precision Cutting of Tungsten Carbide using CVD Diamond Tools

2004/03/04 - 砥粒加工学会 JSAT Best Paper Award Precision truing of a metal-bonded diamond grinding wheel by means of an envelope generation method

2004/03 - 砥粒加工学会 JSAT Best Paper Award Precision truing of a metal-bonded diamond grinding wheel by means of an envelope generation method

2003/06/18 - 工作機械技術振興財団 Machine Tool Technology Promotion Award Ultraprecision Ductile Cutting of Poly-Crystal Germanium

2003/06 - 工作機械技術振興財団 Machine Tool Technology Promotion Award Ultraprecision Ductile Cutting of Poly-Crystal Germanium

2003/05/23 - The 4th Int. Conf. on Intelligent Processing and Manufacturing of Materials Best Paper Award in Materials Processing Ductile Machining Phenomena of Nominally Brittle Materials at the Nanoscale

2003/05 - The 4th Int. Conf. on Intelligent Processing and Manufacturing of Materials Best Paper Award in Materials Processing Ductile Machining Phenomena of Nominally Brittle Materials at the Nanoscale

2002/10/03 - 精密工学会 JSPE Takagi Award Research on Ultra-high Speed and Ultra-precision Machining

2002/10 - 精密工学会 JSPE Takagi Award Research on Ultra-high Speed and Ultra-precision Machining

2002/06/18 - 工作機械技術振興財団 Machine Tool Technology Promotion Award Ductile-Brittle Transition Behavior in Ultraprecision Cutting of Optical Glass

2002/06 - 工作機械技術振興財団 Machine Tool Technology Promotion Award Ductile-Brittle Transition Behavior in Ultraprecision Cutting of Optical Glass

2001/09/24 - 精密工学会 JSPE Best Presentation Award Ultraprecision Cutting of Calcium Fluoride (2nd report)- Aspherical Lens Fabrication

2001/09 - 精密工学会 JSPE Best Presentation Award Ultraprecision Cutting of Calcium Fluoride (2nd report)- Aspherical Lens Fabrication

2000/12/13 - 青葉工学振興会 Aoba Scientific Foundation Research Encouragement Award Research on Brittle-Ductile Transition in Ultraprecision Cutting of Single-Crystal Silicon

2000/12 - 青葉工学振興会 Aoba Scientific Foundation Research Encouragement Award Research on Brittle-Ductile Transition in Ultraprecision Cutting of Single-Crystal Silicon

1998/04/01 - 日本機械学会生産加工・工作機械部門 JSME Manufacturing and Machine Tool Award for Outstanding Presentation Tool Shape Effects on Diamond Cutting Process and Finished Surface Quality

1998/04 - 日本機械学会生産加工・工作機械部門 JSME Manufacturing and Machine Tool Award for Outstanding Presentation Tool Shape Effects on Diamond Cutting Process and Finished Surface Quality

Show all

The Engineering Academy of Japan , The International Academy for Production Engineering (CIRP) , Japan Society of Electrical-Machining Engineers (JSEME) , Japan Laser Processing Society (JLPS) , European Society for Precision Engineering and Nanotechnology (euspen) , Japan Society for Applied Physics (JSAP) , The Japan Society for Abrasive Technology , American Society for Precision Engineering (ASPE) , The Japan Society for Precision Engineering , The Japan Society of Mechanical Engineers