Rchr
J-GLOBAL ID：200901098103372389   Update date: Apr. 30, 2024

Uemori Takeshi

Uemori Takeshi
Affiliation and department：
Okayama University The Graduate School of Natural Science and Technology

About Okayama University The Graduate School of Natural Science and Technology


Research field  (1)： Manufacturing and production engineering
Research theme for competitive and other funds  (14)：
  • 2021 - 2024 Prediction of deformation localization and fracture in polycrystalline titanium alloy based on 3D measurement of ultra-small inhomogeneous deformation
  • 2019 - 2023 Springback analysis of metallic materials by yield surface taken into into consideration crystal orientation changes with plastic deformation
  • 2018 - 2021 Prediction of Development of Inhomogeneous Plastic Deformation and Fracture Based on Change in Elastic Height Distribution in Polycrystalline Metals
  • 2015 - 2018 高精度大ひずみ弾塑性材料モデルを用いた一貫成形FEMの開発とその応用
  • 2013 - 2016 Establishment of prediction and evaluation techniques of the effect of initial residual stress in sheet metal forming process
Show all
Papers (111)：
  • OKUI Kento, TADA Naoya, UEMORI Takeshi, SAKAMOTO Junji, SAKAKIBARA Keita. Relationship between cyclic tensile properties of cellulose nanofiber reinforced natural rubber and volume fraction of bound rubber obtained from swelling tests. Transactions of the JSME (in Japanese). 2024. 90. 932. 24-00008-24-00008
  • SAKAMOTO Junji, TADA Naoya, UEMORI Takeshi. Vibration change and crack propagation under bending vibration of aluminum alloy. Transactions of the JSME (in Japanese). 2024. 90. 930. 23-00246-23-00246
  • Effect of artificial defect on tensile properties of thin titanium alloy wire. 2023. 19-G04
  • Prediction of active slip system for commercially pure titanium sheet by crystal plasticity finite element analysis. Extended abstract of The Advanced Technology in Experimental Mechanics and International DIC Society Joint Conference 2023 (ATEM-iDICs '23). 2023. 19-G05
  • Naoya Tada, Takeshi Uemori, Junji Sakamoto. Prediction of slip activity of crystal grains around semi-circular and semi-elliptical notches in thin-sheet specimens of pure titanium using formulated macroscopic stress distribution and crystal orientation. Engineering Failure Analysis. 2023. 107623-107623
ｍore...
MISC (77)：
  • 井木祐輔, 上森武, 多田直哉, 坂本惇司. 異周速圧延を受ける純アルミニウムの集合組織形成に関する結晶塑性均質化有限要素解析. 日本塑性加工学会第74回塑性加工連合講演会講演論文集. 2023. 97-98
  • 緒方隆太, 多田直哉, 上森武, 坂本惇司. 円孔付き純チタン平板試験片の弾性および塑性域引張における結晶粒中心と粒界近傍における表面高度変化. 日本機械学会M&M2023材料力学カンファレンス講演予稿集. 2023. MM0310
  • 大橋弘晃, 多田直哉, 上森武, 坂本惇司. 純チタン薄膜試験片の段階的荷重増加繰返し引張試験における除荷後の結晶方位と表面高度の変化. 日本機械学会M&M2023材料力学カンファレンス講演予稿集. 2023. MM0311
  • 坂本惇司, 多田直哉, 上森武. アルミニウム合金における 曲げ振動時の疲労損傷に関する検討. 日本材料学会第72期学術講演会講演論文集. 2023. 504504
  • 土居 雅利, 上森 武, 多田 直哉, 坂本 惇司. 結晶塑性有限要素解析による多結晶純チタン薄膜の活動すべり系予測. 日本機械学会中国四国支部第61期総会・講演会予稿集. 2023. 02c2
ｍore...
Books (1)：
  • 板材のプレス成形 : 曲げ・絞りの基礎と応用
    コロナ社 2020 ISBN:9784339043846
Lectures and oral presentations  (105)：
  • 疲労初期段階の表面高度変化を用いた純チタンの疲労き裂発生箇所の予測の検討
    (軽金属学会中国四国支部第13回講演大会講演概要集 2021)
  • Analytical Study on Evaluation of Bauschinger Effect of Aluminum Sheet by L-bending Test
    (2021)
  • Evaluation of Stress Reversal Deformation Behavior of 590 MPa High Tensile Strength Steel Sheet by Using L-Bending Analysis
    (日本材料学会学術講演会講演論文集 2020)
  • Effect of resin film lamination on tensile deformation characteristics of stainless steel foil
    (材料とプロセス(CD-ROM) 2020)
  • Experimental study on strength differential effect of stainless steel sheet
    (材料とプロセス(CD-ROM) 2020)
ｍore...
Education (2)：
  • - 2001 Hiroshima University
  • - 2001 Hiroshima University Graduate School, Division of Engineering
Professional career (1)：
  • 博士(工学) (広島大学)
Work history (6)：
  • 2014/12 - 現在 Okayama University The Graduate School of Natural Science and Technology
  • 2012/04 - 2014/11 Kindai University Faculty of Engineering, Department of Mechanical Engineering
  • 2008/04 - 2012/03 Kindai University Faculty of Engineering, Department of Mechanical Engineering
  • 2005/04 - 2008/03 Hiroshima University Graduate School of Engineering
  • 2001 - - 広島大学助手
Show all
Committee career (3)：
  • 2021/04 - 現在 日本機械学会 材力部門 運営委員会
  • 2020/04 - 現在 日本機械学会 hcp金属の機能・性能評価に関する研究分科会
  • 2018/04 - 2022/03 日本軽金属学会 中・高温域におけるアルミニウム合金の機械的特性に関する研究部会
Awards (3)：
  • 2002 - 日本塑性加工学会論文賞
  • 塑性加工学会新進賞
  • 塑性加工学会論文賞
Association Membership(s) (6)：
THE ADHESION SOCIETY OF JAPAN ,  THE JAPAN INSTITUTE OF LIGHT METALS ,  THE SOCIETY OF MATERIALS SCIENCE, JAPAN ,  THE JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY ,  THE IRON AND STEEL INSTITUTE OF JAPAN ,  THE JAPAN SOCIETY OF MECHANICAL ENGINEERS
※ Researcher’s information displayed in J-GLOBAL is based on the information registered in researchmap. For details, see here.

Return to Previous Page

TOP

BOTTOM