PARK Hyung-Won

パクヒョンウォン | PARK Hyung-Won

Affiliation and department：
Job title： Associate Professor

Research field (3)： Manufacturing and production engineering , Material fabrication and microstructure control , Structural and functional materials

Research keywords (3)： Metal Processing , Materials Science and Engineering , Metallurgical and Materials Engineering

Research theme for competitive and other funds (13)：

2024 - 2026 切削速度2000m/minまでの高速旋削による6000系アルミ合金の切削表面に起こる切削挙動と冶金現象を同時に探求
2024 - 2025 動的冶金現象を活用した高強度アルミ二ウム合金の連続製造プロセス開発の基礎研究
2024 - 2025 TMS 2025 Annual Meeting & Exhibition
2024 - 2025 Elucidation of Metallurgical Phenomena at Cutting Surface during High-Speed Turning of Ti-6Al-4V Alloy with Ceramic versus Carbide Tools
2024 - 2025 切削速度900m/minを超える高速切削による炭素鋼のナノサイズ表面層の拡張可能性の探求

Show all

Papers (23)：

Hyung-Won Park, Hyeon-Woo Park, Yuki Shimomura, Yun-Soo Lee, Hyeon-Woo Son, Sungho Jeon, Tomohiro Hata, Jun Yanagimoto. Influence of deformation temperature on flow stress and dynamic metallurgical phenomena in Al-5.81Zn-1.65Mg alloy subjected to thermomechanical processing. Materials Today Communications. 2025. 111208
Hyeonseok Kim, Shinsuke Tobisawa, Hyungwon Park, Jaehyo Kim, Jongho Lee, Duk Shin. Aging-induced degradation in tracking performance in three-dimensional movement. SICE Journal of Control, Measurement, and System Integration. 2024. 17. 1. 239-246
Hyung-Won Park, Masaki Matsuda, Kanji Ishitaka, Shinichi Funase, Atsushi Tomizawa, Akira Hosokawa, Jun Yanagimoto, Takashi Ueda. Formation mechanism of ultrafine grains at machined surface of 0.45 % carbon steel under high-speed turning process. Journal of Manufacturing Processes. 2024. 113. 171-182
Yuki Shimomura, Hyung-Won Park, Hyeon-Woo Park, Yuji Sato, Jun Yanagimoto. Constitutive Description of Flow Curve for Duplex Titanium Alloy for Hot Forming under Elevated Temperature. ISIJ International. 2024. (Advance online publication)
Kyunghyun Kim, Hyung-Won Park, Sheng Ding, Hyeon-Woo Park, Jun Yanagimoto. Flow Stress of Duplex Stainless Steel by Inverse Analysis with Dynamic Recovery and Recrystallization Model. Tetsu-to-Hagane. 2023. 109. 11. 915-926

ｍore...

MISC (5)：

Hyung-Won PARK. 1パス大ひずみ加工熱処理プロセスによる高強度超微細粒純チタンの創製基礎原理の解明. 天田財団助成研究成果報告書. 2022
Hyung-Won PARK. Seeing is Believing -Find Motivation-. Bulletin of the JSTP. 2020. 3. 27. 169-170
Hyung-Won Park, Jun Yanagimoto. Formation and mechanical properties of bimodal microstructures in 0.2% carbon steel by heavy-reduction hot/warm compression. 11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014. 2014. 81. 462-467
Hyung-Won Park, Jun Yanagimoto. Formation and Mechanical Properties of Bimodal Microstructures in 0.2% Carbon Steel by Heavy-Reduction Hot Compression. Proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing. 2013. 3297-3302
J. YANAGIMOTO, H.W. PARK. Fundamental investigation in manufacturing formable high-strength steel strips with bimodal microstructure by width-restricted heavy-reduction controlled rolling process. Bulletin of The Iron and Steel Institute of Japan (Ferrum). 2012. 17. 12. 848-851

Patents (7)：

Frame of Mobile Terminal having Multi-layered Metal Structure
Aluminum Alloy
ALUMINUM ALLOY
ALUMINUM ALLOY
Aluminum Alloy

ｍore...

Lectures and oral presentations (61)：

Unique dynamic softening phenomena occurring during high-speed hot compression of pure titanium below the β transus
(第75回塑性加工連合講演会 723 2024)
Flow stress, microstructure, and heat treatment characteristics of Al-5.81Zn-1.65Mg aluminum alloy subjected to heavy-reduction thermomechanical processing
(2024 The Japan Institute of Metals and Materials 263 2024)
Suppressing oxidation during high-speed turning of Ti-6Al-4V alloy with nitrogen gas injection : effects on cutting behavior and microstructure at machined surface
(CAMP-ISIJ Vol.37 PS-13 2024)
動的冶金現象を活用した高強度アルミ合金の連続製造プロセス開発の基礎研究
(三五ものづくり財団成果報告会 2024)
二相チタン合金の熱間流動応力統合式と内部組織変化
(2024年度塑性加工春季講演会 2024)

ｍore...

Education (3)：

2011 - 2014 The University of Tokyo School of Engineering Department of Mechanical Engineering
2009 - 2011 Gyeongsang National University Division of Materials Science and Engineering Department of Metallurgical and Materials Engineering
2001 - 2009 Gyeongsang National University School of Materials Science and Engineering Department of Metallurgical and Materials Engineering

Professional career (1)：

Ph.D. (The University of Tokyo)

Work history (14)：

2021/09 - 現在 The University of Tokyo School of Engineering Research Fellow
2021/04 - 現在 KOMATSU UNIVERSITY Faculty of Production Systems Engineering and Sciences Associate Professor
2018/07 - 2021/07 The University of Tokyo School of Engineering Cooperative Research Fellow
2018/04 - 2021/03 Komatsu University Faculty of Production Systems Engineering and Sciences Assistant Professor
2017/10 - 2018/03 The University of Tokyo Institute of Industrial Science Project Researcher

Show all

Committee career (7)：

2024/03 - 現在日本鉄鋼協会創形創質工学部会若手フォーラム幹事
2023/07 - 現在日本塑性加工学会国際交流委員
2023/04 - 現在日本鉄鋼協会創形創質工学部会委員
2023/04 - 現在日本塑性加工学会圧延工学分科会運営委員
2023/04 - 現在日本塑性加工学会出版事業委員

Show all

Awards (2)：

2023/03 - 日本鉄鋼協会澤村論文賞(2023年表彰) Flow Stress of Duplex Stainless Steel by Inverse Analysis with Dynamic Recovery and Recrystallization Model
2019/01 - The Japan Society for Technology of Plasticity Best Presentation Award Acquisition and constitutive equation for flow behavior of Inconel 718 alloy under hot forming in a region of r'' precipitation

Association Membership(s) (5)：

THE JAPAN INSTITUTE OF LIGHT METALS , THE IRON AND STEEL INSTITUTE OF JAPAN , THE JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY , The Minerals, Metals & Materials Society (TMS) , The Japan Institute of Metals and Materials

※ Researcher’s information displayed in J-GLOBAL is based on the information registered in researchmap. For details, see here.

Return to Previous Page