Nakanishi Kenji

• 2000 - 冷間側方押出し鍛造加工による軸付き円盤形状部品のネットシェイプ成形法に関する研究
• 1997 - LSI実装用高密度配線に対応するボ-ルボンディングツ-ルの開発
• 実験シミュレーションによる塑性加工の塑性流れとトライボロジに関する研究
• 医療診断支援システムの開発・腰椎の生体工学的解析
• アルミニウム合金熱間押出し加工における高品位加工を達成するメタルフロー制御とダイス設計に関する研究
各種金属材料の高精度変形抵抗推算法の開発と成形加工プロセス解析・設計への応用
Experimental Analyses of the Material Flow and Tribology in a Forming Process by Applying the Physical Simulation Method.
Development of Medical Diagnose Assistance System・Biomechanical Analysis of the Lumber Spine
Metal flow control and Die Design in hot extrusion of aluminum alloy for achieving excellent products.
Development of the exact prediction method of flow stresses of metals and alloys and Its Application to the Analysis and Design of a Forming Process.

• MATSUDA Takehiko, NAKANISHI Kenji. Microforming of Magnesium Alloy by Simultaneous Heating and Forming. Journal of the JSTP. 2013. 54. 632. 53-57
• Kamitani Shunpei, Nakanishi Kenji, Matsushita Takafumi, Syahrullail Samion. Measurement of Coefficient of Friction under Bulk Plastic Deformation by Using Plane Strain Extrusion Apparatus with Plane Plate Tool and Taper Die. Tribology Online. 2012. 7. 4. 249-257
• S. Syahrullail, S. Kamitani, K. Nakanishi. Experimental Evaluation of Refined, Bleached, and Deodorized Palm Olein and Palm Stearin in Cold Extrusion of Aluminum A1050. TRIBOLOGY TRANSACTIONS. 2012. 55. 2. 199-209
• KAMITANI Shunpei, NAKANISHI Kenji, GUO Y-M, OZAKI Masatoshi, HONDA Yuichi. Effects of Lubricating Oils on Surface Quality of Aluminum Product by Using Tool with Micro Groove Arrays Formed on Its Surface in Cold Extrusion. Proc.10th Int.Conf.Technology of Plasticity(ICTP2011). 2011. 176-181
• Satoru Kuwaharada, Kenji Nakanishi, Yuji Mure, Yasumichi Matsumoto. Development of Model Materials for Physical Forming Simulation of Metals and Alloys. MATERIALS TRANSACTIONS. 2011. 52. 8. 1589-1594

ｍore...

• MATSUDA Takehiko, NAKANISHI Kenji, KAMITANI Shunpei, KAMEMURA Yusuke. Formation of a Disk with an Axis by Upsetting with Lateral Extrusion with Improved Shape Transferability at Rim. Journal of the JSTP. 2007. 48. 555. 298-302
• SYAHRULLAIL Samion, KAMITANI Shunpei, NAKANISHI Kenji. Evaluation of RBD Palm Olein as Lubricant on Al and Al-Mg Alloys by Plane Strain Extrusion Test. The research reports. 2006. 48. 48. 9-16
• プレス成形の加工プロセスと型設計に関する研究-回転ノブおよびフライホイ-ルの成形加工-(共著). 鹿児島大学工学部研究報告_鹿児島大学工学部. 2006. 48. 1-8
• 熱間押出し加工におけるトライボロジ-(共著). 月刊トライボロジ-. 2006. 20. 3. 59-61
• 平面ひずみ押出し加工によるパーム油の潤滑特性の検討(共著). 鹿児島大学工学部研究報告_鹿児島大学工学部. 2005. 47. 7-13

ｍore...

• 小径棒材の部分加熱ヘッディング加工方法及び加工装置
• 連結部材及び連結構造
• マグネシウム合金の精密鍛造加工方法
• フイルム貼付装置およびこれを用いたフイルム貼付方法
• 外面に凹凸を有する底付き中空製品の冷間鍛造方法および装置

ｍore...

• 日本塑性加工学会編 塑性加工便覧 (執筆部分 2.1.7.非鉄金属の変形抵抗,pp.31-34)
  コロナ社 2006 ISBN:4339045772
• Metal Flow Control in Hot Extrusion of Aluminum Alloy Using The Pocket Hole Dies-Die Design Aided by Physical Simulation System(jointly worked)
  Advanced Technology of Plasticity' 99 Springer-Verlag, Germany, (ISBN:3-540-66066-6) 1999
• "A New Biomechanical Analysis of the Degenerative Spine"(jointly worked)
  Spinal Disorders in Growth and Aging, Springer-Verlag Tokyo 1995

• 自由鍛造における形状制御技術の開発と応用に関する研究
  1997 - 1998
• Development and Application of Shape Control Technology in Free Forging Process
  1997 - 1998

• - 1970 Kagoshima University
• - 1970 Kagoshima University Graduate School, Division of Engineering
• - 1967 Kagoshima University Faculty of Engineering
• - 1967 Kagoshima University Faculty of Engineering

• Doctor of Engineering (Tokyo Institute of Technology)
• Master of Engineering (Kagoshima University)

• 1980 - 1987 Kagoshima University
• 1980 - 1987 Kagoshima University, Assistant Professor
• 1987 - - 鹿児島大学 教授
• 1987 - - Kagoshima University, Professor
• 1977 - 1980 Kagoshima University
1977 - 1980 Kagoshima university, Lecturer
1970 - 1977 Kagoshima University
1970 - 1977 Kagoshima University, Research Assistant
1967 - 1968 Kagoshima University
1967 - 1968 Kagoshima University, Research Assistant

• 1995 - 1996 日本機械学会 九州支部商議員,機械材料・材料加工部門代議員
• 1985 - 1993 日本塑性加工学会 評議員,九州支部幹事,九州支部長

• 2011/05 - Japan Society for Technology of Plasticity Japan Society for Technology of Plasticity Award Real-Time Visualization and Measurement Method of Three-Dimensional Non-Steady-State Plastic Flow Field Using Stereo X-ray
• 1995 - けい椎外科学会賞(マリオ ボニー賞)
• 1972 - 伸銅技術研究会技術論文賞

THE OTO-RHINO-LARYNGOLOGICAL SOCIETY OF JAPAN, INC. ,  JAPANESE SOCIRTY FOR CLINICAL BIOMECHANICS ,  可視化情報学会(1978.1.1~現在) ,  THE CENTRAL JAPAN ASSOCIATION OF ORTHOPAEDIC SURGERY AND TRAUMATOLOGY ,  日本鉄鋼協会(1989.7.1~2009.12.31) ,  ASM(The Materials Information Society)(1990.2.1~2009.11.30) ,  日本材料科学会(1978.7.1~2010.2.28) ,  精密工学会(1967.12.1~2009.12.31) ,  日本塑性加工学会(1970.4.1~現在) ,  日本機械学会(1965.12.1~2009.12.31)