Rchr
J-GLOBAL ID:200901089742996866   Update date: Mar. 15, 2024

Jiwang Yan

ヤン ジワン | Jiwang Yan
Affiliation and department:
Job title: Professor
Homepage URL  (1): http://www.yan.mech.keio.ac.jp/
Research field  (4): Composite materials and interfaces ,  Nano/micro-systems ,  Material fabrication and microstructure control ,  Manufacturing and production engineering
Research keywords  (5): Nanomechanics ,  Electrical discharge machining ,  Laser processing ,  Micro/nano manufacturing ,  Ultraprecision machining
Research theme for competitive and other funds  (20):
  • 2021 - 2024 SiC金型切削とナノ構造形成およびグラフェン成膜による高機能ガラス光学素子成形
  • 2021 - 2023 レーザ照射によるSi-in-C複合ナノワイヤ生成と次世代Liイオン電池への応用
  • 2020 - 2023 マイクロ・ナノ構造光学素子の大面積ガラス成形における原子スケールの界面制御
  • 2017 - 2020 Ultraprecision forming of hybrid Fresnel lenses using infrared-transparent polymer and single-crystal silicon
  • 2017 - 2019 Laser irradiation-induced micro pillar generation and its application to the fabrication of next-generation Li-ion battery
Show all
Papers (367):
  • Qian Y, Liu B, Hong J, Jiang M, Zhang Z, Zhang L, Huang H, Yan J. Simultaneous flattening and hardening of laser shock peened Zr-based metallic glass surface by nanosecond laser irradiation in a flowing nitrogen atmosphere. Journal of Materials Processing Technology. 2024. 326
  • Brüssel F, Huang W, Yan J. Investigation of failure modes and material structural responses of nanographite coatings on single-crystal silicon by nanoscratching. Tribology International. 2024. 193
  • Yamamuro Y, Shimoyama T, Nagata H, Yan J. Effect of dopant concentration on femtosecond pulsed laser irradiation of yttria-stabilized zirconia for generating nanopores. Journal of Alloys and Compounds. 2024. 980
  • An H, Qian Y, Zhang L, Zhang Z, Huang H, Yan J. On the surface characteristics and removability of RB-SiC composite processed by nanosecond pulsed laser. Composites Part A: Applied Science and Manufacturing. 2024. 180
  • Mansour M.M, El-Hofy H, Yan J, Maher I, Nassef M.G.A, Khaireldien W.M. Controlled vibration amplitude in ultrasonic assisted grinding using FRF guided cutting frequency. International Journal of Machining and Machinability of Materials. 2024. 25. 3-4. 408-431
more...
MISC (73):
  • HJ. Yan, HR. Laser polishing technologies for additive-manufactured metal products. Journal of the Japan Society for Abrasive Technology. 2023. 67. 8. 440-443
  • HJ. Yan, HR. Ultraprecision ductile mode machining of hard brittle materials. Journal of the Japan Society of Mechanical Engineers. 2022. 125. 1247. 11-14
  • HJ. Yan, HR. Ultrasonic vibration-assisted grinding of carbon-based difficult-to-cut materials. Journal of the Japan Society for Precision Engineering. 2022. 88. 7. 541-545
  • HJ. Yan, HR. Electrochemical Machining on an EDM Machine for Fine Finishing of Micro Grooves. Die and Mould Technology. 2022. 37. 4. 14-17
  • L Zhang, YY, Allen, J Yan. Flexible fabrication of fresnel micro-lens array by off-spindle-axis diamond turning and precision glass molding. Precision Engineering. 2022. 74. 186-194
more...
Books (27):
  • Advanced Ceramic Coatings: Fundamentals, Manufacturing, and Classification, R. K. Gupta, A. Motallebzadeh, S. Kakooei, T. A. Nguyen, A. Behera (eds.)
    Elsevier B. V. 2023 ISBN:9780323996594
  • Electrical discharge coating with quarry dust powder suspension
    Advanced Ceramic Coatings: Fundamentals, Manufacturing, and Classification 2023 ISBN:9780323996600
  • Multidisciplinary Science in Micro/Nanoscale Manufacturing
    Elsevier B.V. 2020
  • Special Issue on Multidisciplinary Science in Micro/nanoscale Manufacturing
    Elsevier B.V. 2020
  • Recent Developments of Silicon Anodes for Lithium Ion Batteries
    CMC Publishing CO., LTD. 2019 ISBN:9784781314853
more...
Lectures and oral presentations  (519):
  • Cutting of Microgrooves on Ferrous Metal by Using Laser-Processed cBN Tools
    (The 19th International Conference on Precision Engineering (ICPE2022))
  • Effect of dopant concentration on femtosecond pulsed laser processing characteristics of yttria-stabilized zirconia
    (The 19th International Conference on Precision Engineering (ICPE2022))
  • Laser-induced periodic surface structures generation on single-crystal 4H-SiC by femtosecond pulsed infrared laser irradiation
    (The 19th International Conference on Precision Engineering (ICPE2022))
  • Fabrication of optical surfaces on polymethyl methacrylate by ultra-precision diamond turning
    (The 9th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2022))
  • A Novel Calibration Method of Machining Misalignment in FTS-Based Diamond Turning
    (The 9th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2022))
more...
Education (5):
  • 2000 - 2000 Tohoku University Graduate School, Division of Engineering Department of Mechatronics and Precision Engineering
  • 2000 - Tohoku University Graduate School, Division of Engineering Department of Mechatronics and Precision Engineering
  • 1996 - 1996 Tsinghua University Graduate School, Division of Engineering Department of Precision Instruments and Mechanology
  • 1994 - 1994 Jilin University Graduate School, Division of Engineering Department of Mechanical Engineering
  • 1991 - 1991 Jilin University Faculty of Engineering Department of Mechanical Engineering
Professional career (1):
  • Ph.D. (Tohoku University)
Work history (10):
  • 2017/09 - 現在 Specially Appointed Professor, Tokyo Institute of Technology
  • 2012/04 - 現在 Professor, Keio University, Faculty of Science and Technology
  • 2018/07 - 2019/03 Leverhulme Visiting Professor, Manchester University, UK
  • 2018/07 - 2019/03 Visiting Professor, Manchester University, UK
  • 2014/04 - 2015/03 Adjunct Part-time Professor, The Uiniversity of Tokyo
Show all
Committee career (101):
  • 2022/05 - 現在 Japan Society of Laser Technology (JSLT) Director
  • 2022/03 - 現在 Japan Society of Precision Engineering (JSPE) Director, Executive Director, Chairman of Publication Sector, Chairman of Journal Review Board
  • 2019/04 - 現在 日本機械学会 JSME Journal Editorial Commitee Member
  • 2019/04 - 現在 日本機械学会 日本機械学会学術誌編修部会委員
  • 2019/04 - 現在 日本機械学会 学術誌編修部会委員
Show all
Awards (87):
  • 2023/03 - International Journal of Extreme Manufacturing (IJEM), IoP publishing 2022 IJEM Best Paper Award Tool path generation and optimization for freeform surface diamond turning based on an independently controlled fast tool servo
  • 2023/03 - The Japan Society for Precision Engineering JSPE Best Paper Award Flexible fabrication of Fresnel micro-lens array by off-spindle-axis diamond turning and precision glass molding
  • 2021/06/07 - 工作機械技術振興財団 Machine Tool Technology Promotion Award 炭素拡散反応を用いた形彫り放電加工による多結晶ダイヤモンドの3次元形状創製
  • 2021/06/07 - 工作機械技術振興財団 Machine Tool Technology Promotion Award Measurement and Compensation of Tool Contour Error Using White Light Interferometry for Ultra-Precision Diamond Turning of Freeform Surfaces
  • 2021/06 - 工作機械技術振興財団 Machine Tool Technology Promotion Award Measurement and Compensation of Tool Contour Error Using White Light Interferometry for Ultra-Precision Diamond Turning of Freeform Surfaces
Show all
Association Membership(s) (9):
The International Academy for Production Engineering (CIRP) ,  Japan Society of Electrical-Machining Engineers (JSEME) ,  Japan Laser Processing Society (JLPS) ,  European Society for Precision Engineering and Nanotechnology (euspen) ,  Japan Society for Applied Physics (JSAP) ,  The Japan Society for Abrasive Technology ,  American Society for Precision Engineering (ASPE) ,  The Japan Society for Precision Engineering ,  The Japan Society of Mechanical Engineers
※ Researcher’s information displayed in J-GLOBAL is based on the information registered in researchmap. For details, see here.

Return to Previous Page