Rchr
J-GLOBAL ID：200901096262976853   Update date: Nov. 19, 2024

Takeda Yukio

タケダ ユキオ | Takeda Yukio
Affiliation and department：
Institute of Science Tokyo School of Engineering

About Institute of Science Tokyo School of Engineering


Job title： Professor
Homepage URL  (1)： http://www.msd.mech.e.titech.ac.jp/
Research field  (4)： Mechanics and mechatronics ,  Robotics and intelligent systems ,  Machine elements and tribology ,  Design engineering
Research keywords  (33)： Kinematics of Machinery ,  機構学 ,  welfare engineering ,  robotics ,  machine design ,  精密位置決め ,  運動学特性 ,  高負荷 ,  粗微動機構 ,  粗微動駆動 ,  位置決め精度 ,  機構形式 ,  誤差解析 ,  機械要素 ,  転がり球面軸受 ,  最適設計 ,  静力学特性 ,  位置姿勢分離機構 ,  パラレルマニピュレータ ,  絶対精度 ,  運動伝達性 ,  設計工学 ,  ロボット ,  剛性 ,  ハイブリッド機構 ,  パラレル機構 ,  精度 ,  特異点 ,  ハイブリッドマニピュレータ ,  キャリブレーション ,  作業領域 ,  パラレルメカニズム ,  機構総合
Research theme for competitive and other funds  (22)：
  • 2023 - 2027 Assist-as-needed walking assisting system based on the redundant-hybrid actuation
  • 2020 - 2024 薄膜状電子デバイスの複曲面上実装を実現する微細毛柔軟静電吸着ハンドリングシステム
  • 2017 - 2020 Novel kinematics based on the introduction of the dynamic pairs in the kinemato-dynamic modeling of mechanical systems composed of human and wearable assist-devices
  • 2013 - 2015 弾性ジョイントからなる並進・回転運動分離形5自由度パラレルロボットの設計法
  • 2009 - 2011 Dexterous remote manipulation by the Casting manipulator system
Show all
Papers (108)：
  • Ming Jiang, Lei Cao, Qizhi Meng, Vincenzo Parenti-Castelli, Yusuke Sugahara, Yukio Takeda. Design and Prototyping of a Hand Exoskeleton for Finger Rehabilitation by Driving Distal Phalanx. Mechanisms and Machine Science. 2024. 202-209
  • Yifan Feng, Yusuke Sugahara, Ming Jiang, Marco Ceccarelli, Yukio Takeda. Conceptual Design of Hybrid Thrustered Cable-Suspended Parallel Robots. Mechanisms and Machine Science. 2024. 273-282
  • Ryohei Morita, Ming Jiang, Andrea Botta, Yusuke Sugahara, Giuseppe Quaglia, Marco Ceccarelli, Yukio Takeda. Design and Preliminary Testing of WELiBot: A Wearable End-Effector Type Upper Limb Assistive Robot. Mechanisms and Machine Science. 2024. 67-75
  • Jiancheng Nie, Ming Jiang, Andrea Botta, Yusuke Sugahara, Yukio Takeda. Adaptive Ground Clearance Control for Preparation for Fall in a Wearable Assistive Device. 2024 IEEE 18th International Conference on Advanced Motion Control (AMC). 2024
  • Yuhang Lei, Ming Jiang, Yusuke Sugahara, Yukio Takeda. Three-Actuated-DOF Parallel Continuum Robot with High Twisting Performance: Cosserat Rod-Based Kineto-Static Modeling and Simulation. Advances in Mechanism and Machine Science. 2023. 641-650
ｍore...
MISC (290)：
  • 蔵田, 真鈴, Kurata, Mari, 干場, 功太郎, Hoshiba, Kotaro, 菅原, 雄介, Sugahara, Yusuke, 武田, 行生, TAKEDA, YUKIO. 被介助者上半身の姿勢制御可能な介助者と協働する移乗支援装置の開発- コンセプト提案と縮小モデルでの検討 --Concept Proposal of Cooperative Transfer Assist Device Capable of Controlling Posture of Patient’s Upper Body. LIFE2022講演論文集. 2022
  • 菅原, 雄介, Sugahara, Yusuke, 八木, 達也, Yagi, Tatsuya, 武田, 行生, TAKEDA, YUKIO. 高齢者向けモビリティのためのペダリング運動負荷システム- 楕円軌道ペダルを用いた介入実験 --Pedaling Exercise Load System of a Personal Mobility Vehicle for the Elderly- Intervention experiment using elliptical path pedal system -. LIFE2022講演論文集. 2022
  • 武田, 行生, TAKEDA, YUKIO, 菅原, 雄介, Sugahara, Yusuke. 協調学習操作系を用いたハンズフリーモビリティにおける事前学習の有効性評価-Evaluation of the Effectiveness of Prior Learning in Hands-Free Mobility with Cooperative Learning Operation system. LIFE2022講演論文集. 2022
  • 斎藤, 天丸, Saito, Takamaru, 菅原, 雄介, Sugahara, Yusuke, 武田, 行生, TAKEDA, YUKIO. 減速機付きアクチュエータの駆動冗長性による軽量化-Mass reduction of geared actuator by means of redundant drive. 日本機械学会ロボティクス・メカトロニクス講演会2022予稿集. 2022
  • 熱海, 七都, Atsumi, Nanato, 菅原, 雄介, Sugahara, Yusuke, 栃木, 渉, Tochigi, Wataru, 武田, 行生, TAKEDA, YUKIO. フィン状連鎖を有する水撃音響式壁面検査のための平面パラレルワイヤ駆動機構(剛性行列に基づく解析と実験による剛性向上効果の評価)-Planar cable-driven parallel robot with fin-like chains for water jet impact acoustic wall inspection (Evaluation of the stiffness enhancement effect through analysis based on stiffness matrix and experiment). 機素潤滑設計部門講演会講演論文集. 2021. 1207
ｍore...
Patents (5)：
  • 6自由度パラレル機構
  • 関節駆動装置
  • 松葉杖形歩行支援機械
  • 歩行支援装置
  • 松葉杖形歩行支援機械
Books (10)：
  • Theoretical and Applied Mechanics Japan
    National Committee for IUTAM, Science Council of Japan 2008
  • Theoretical and Applied Mechanics Japan
    National Committee for IUTAM, Science Council of Japan 2008
  • 最新 機械機器要素技術
    (有)エヌジーティー 2008 ISBN:9784990371319
  • Kinematics of Machinery
    The Japan Society of Mechanical Engineers 2007 ISBN:9784888981675
  • 機械工学のための数学I -基礎数学-
    朝倉書店 2007
ｍore...
Lectures and oral presentations  (129)：
  • Development of gripper with large gripping force for a draw pipe bender which fabricates complex three dimensional shaped pipes (proposal of a gripping mechanism which grasps 2-dimensional shaped pipes)
    (10th Machine Design and Tribology Division Meeting in JSME 2010)
  • Peg-in-hole by a position-orientation decoupled parallel manipulator with impedance control
    (10th Machine Design and Tribology Division Meeting in JSME 2010)
  • Development of high precision parallel mechanism for vacuum chamber
    (10th Machine Design and Tribology Division Meeting in JSME 2010)
  • 3-RPSR Parallel Mechanism with Triple Revolute Joints on the Base
    (2010 JSME Conference on Robotics and Mechatronics 2010)
  • Development of a rehabilitation device using parallel mechanism 窶骭€ composition of control system
    (2010 JSME Conference on Robotics and Mechatronics 2010)
ｍore...
Education (3)：
  • - 1989 Tokyo Institute of Technology Graduate School, Division of Science and Engineering
  • - 1989 東京工業大学大学院 理工学研究科 機械工学専攻
  • - 1987 Tokyo Institute of Technology School of Engineering
Professional career (2)：
  • Doctor of Engineering (Tokyo Institute of Technology)
  • Master of Engineering (Tokyo Institute of Technology)
Work history (6)：
  • 2016/04 - 現在 Tokyo Institute of Technology School of Engineering Professor
  • 2013/04 - 2016/03 Tokyo Institute of Technology Super Mechano-System Innovation and Development Center
  • 2012/05 - 2016/03 Tokyo Institute of Technology
  • 1996/08 - 2012/04 Tokyo Institute of Technology
  • 2002 - 2004 Ministry of Education,Culture,Sports,Science and Technology
Show all
Committee career (4)：
  • 2002 - 2003 日本ロボット学会 評議員
  • 2002 - 2003 日本ロボット学会 評議員
  • 1999 - 2002 日本設計工学会 評議員
  • 1999 - 2002 日本設計工学会 評議員
Awards (13)：
  • 2013/10 - IFToMM Highly Commended Paper Award: The 3rd IFToMM International Symposium on Robotics and Mechatronics
  • 2012/11 - IFToMM Best Paper Award: The 2nd IFToMM Asian Conference on Mechanism and Machine Science
  • 2012/04 - 日本機械学会 機素潤滑設計部門一般表彰(優秀講演)
  • 2011/05 - 日本設計工学会 武藤栄次賞優秀設計賞
  • 2011/05 - 日本設計工学会 功労賞
Show all
Association Membership(s) (11)：
Japan Society for Design Engineering ,  International Federation for the Theory of Machines and Mechanisms ,  Robotic Society of japan ,  Japan Society of Precision Engineering ,  The Japan Society of Mechanical Engineers ,  計測自動制御学会 ,  日本設計工学会 ,  International Federation for the Theory of Machines and Mechanisms ,  日本ロボット学会 ,  精密工学会 ,  日本機械学会
※ Researcher’s information displayed in J-GLOBAL is based on the information registered in researchmap. For details, see here.

Return to Previous Page

TOP

BOTTOM