Rchr
J-GLOBAL ID:200901099398822573
Update date: May. 05, 2024
Takata Naoki
タカタ ナオキ | Takata Naoki
Affiliation and department:
Job title:
Associate professor
Other affiliations (2):
Homepage URL (2):
http://www.numse.nagoya-u.ac.jp/P6/kobashi/
,
https://www.researchgate.net/profile/Naoki_Takata2
Research field (5):
Metallic materials
, Metals and resources production
, Material fabrication and microstructure control
, Nanomaterials
, Structural and functional materials
Research keywords (7):
electron microscopy
, Microstructure
, Intermetallics
, Physical metallurgy
, 金属積層造形
, Light metals
, Steels
Research theme for competitive and other funds (41):
- 2024 - 2028 金属3Dプリンタ技術が生み出す革新的耐熱アルミニウム合金の強化原理
- 2023 - 2025 アルミニウム積層造形体の延性異方性を生み出す不均一変形のその場観察と定量解析
- 2022 - 2025 金属3Dプリンタを用いた非平衡組織・準安定相の創出
- 2022 - 2025 溶融めっき皮膜の機能創出に資する構造因子
- 2021 - 2023 レーザ3D積層造形が創出するアルミニウム合金の新奇力学機能とその制御
- 2020 - 2023 Modified design for aluminum-based superalloys for improvement of creep rupture life at elevated temperatures above 200 degrees C
- 2022 - 2023 金属3Dプリンタ造形体の複合構造コーティングによる高機能・多機能化
- 2022 - 2022 Deformation mechanisms of superlattices and nanocomposite based multifunctional nanolaminates
- 2022 - 2022 3D積層造形技術を活用した鉄鋼のオーステナイト逆変態制御
- 2020 - 2022 マイクロ金属単結晶の強度に及ぼす材料強化因子の役割
- 2021 - アルミ鋳造合金における時効析出の研究
- 2021 - アルミニウム合金の組成、プロセスと特性の研究
- 2020 - 2021 AM造形アルミ材の腐食進展メカニズム解明
- 2019 - 2021 Designing and Microstructural Control of Cast-Type Aluminum-Based Superalloys Applicable at 300°C in Service
- 2019 - 2021 Al-Si-Cu-Mg鋳造合金における高温域時効析出の研究
- 2018 - 2021 鉄鋼材料への高機能溶融亜鉛合金めっき皮膜創製とその構造制御
- 2018 - 2021 革新的耐熱アルミニウム合金の研究開発
- 2017 - 2020 Design and microstructure control of aluminum based superalloys based on thermodynamic calculation
- 2019 - 2020 共晶反応を利用した新規耐熱アルミニウム鋳造合金の設計と凝固組織制御
- 2017 - 2020 新規軽量耐熱合金の探索
- 2016 - 2020 階層的マルチヘテロ構造の創出によるアルミニウム合金の多機能化とその指導原理の解明
- 2017 - 2019 共晶反応を利用した新規耐熱アルミニウム鋳造合金の設計と凝固組織制御
- 2016 - 2019 マイクロピラー圧縮試験法を用いたアルミニウム合金の局所変形抵抗の評価
- 2016 - 2019 高機能溶融亜鉛めっき皮膜創成とナノ解析
- 2016 - 2018 Trial measurement of interfacial strength in multi-phase materials using micropillar compression tests
- 2017 - 2018 アルミニウム合金から作製したα-Al(fcc)単結晶マイクロピラーの強度に及ぼす転位源の影響
- 2017 - 2018 金属間化合物を強化相とした新規耐熱アルミニウム合金の設計と組織制御
- 2016 - 2018 溶融亜鉛めっき高強度複相鋼の材料設計に関する研究
- 2017 - フェライト系ステンレス鋼の靭性に及ぼすスタビライズ元素の影響
- 2016 - 2016 マイクロピラー圧縮試験による鉄鋼材料の局所力学特性評価法の確立
- 2013 - 2016 Role of interface between Fe2Nb Laves phase and gamm-Fe matrix in the strength of austenitic heat resistant steels
- 2010 - 2016 革新的800°C級火力発電プラント用超耐熱鋼の設計原理
- 2016 - 2016 先進材料の製造プロセス、物性、実用化に関する国際会議での招待講演への参加
- 2010 - 2012 次世代火力発電プラント使用条件下におけるオーステナイト系耐熱鋼の変形機構
- 2009 - 2011 オーステナイト系耐熱鋼のクリープ抵抗における結晶粒界の役割
- 2010 - 2011 Deformation of novel austenitic heat resist ant steels under extre me environments for th ermal power plants
- 2007 - 2010 耐ロバスト性を有する軽量高比強度TiAl基鍛造合金の組織制御
- 2007 - 2009 Microstructure control of wrought TiAl Alloys with good robustness
- 2007 - 2008 Nano-DP鋼板に関する共同研究
- 2006 - 2008 強ひずみ加工を必要としない超微細粒鉄鋼材料の創製とその高延性化
- 2006 - 2007 強ひずみ加工を必要としない超微細粒鉄鋼材料の創製とその高延性化
Show all
Papers (185):
-
Wenyuan Wang, Yifan Xu, Misaki Deguchi, Naoki Takata, Asuka Suzuki, Makoto Kobashi, Masaki Kato, Masatoshi Mitsuhara, Hideharu Nakashima. Thermal stability of refined Al6(Fe, Mn) phase formed in laser powder bed fusion process. Journal of Alloys and Compounds. 2024. 992
-
Hoshi Y, Miyazawa R, Otani Y, Kim D, Takata N, Kobashi M. Four-dimensional electrochemical impedance spectroscopy: Role of microstructure on corrosion behaviour of Al-Si alloys additive-manufactured by laser powder bed fusion. Corrosion Science. 2024. 232
-
Shen H, Suzuki A, Takata N, Kobashi M. Elucidating dominant flow channel size for capillary performance of open-cell porous wicks. International Journal of Heat and Mass Transfer. 2024. 223
-
Zhu T, Takata N, Kim D, Kobashi M, Yoshino M, Tsukamura M. Effect of Cr content on thermally activated deformation in single-crystal micropillars of Fe-Cr binary alloys. Materials Science and Engineering: A. 2024. 900
-
Konishi Y, Hamasaki Y, Sasaki T, Adachi H, Ishikawa K, Kim D, Takata N, Miyajima Y. Effect of low-temperature annealing on electric resistivity and mechanical anisotropy of Al-Si binary alloy fabricated by laser-powder bed fusion. Journal of Alloys and Compounds. 2024. 982
more...
MISC (77):
-
足立大樹, LIU Mulin, 小橋眞, 岩井駿介, 高田尚記. Analysis of mechanical properties in Al-Si additive manufactured alloy by in-situ XRD measurement during tensile test. X線材料強度に関するシンポジウム講演論文集. 2023. 57th
-
高田尚記, 劉牧霖, 平田雅裕, 鈴木飛鳥, 小橋眞, 加藤正樹, 足立大樹. 引張試験/その場XRD測定を用いたAl-Si合金積層造形体の高強度支配因子の同定. 日本金属学会講演大会(Web). 2023. 173rd
-
古原 忠, 山末 英嗣, 柳本 潤, 大塚 貴之, 福田 和久, 小笠原 太, 松浦 宏行, 菅野 伸国, 高田 尚記, 堤 康一. 新春座談会2023 鉄が果たすべき役割とは. ふぇらむ = Bulletin of the Iron and Steel Institute of Japan : (一社)日本鉄鋼協会会報 / 日本鉄鋼協会 編. 2023. 28. 1. 2-9
-
高田 尚記. 金属材料実験の手引き 1.組織観察 1-4 光学顕微鏡,SEM観察のための試料の調整. まてりあ. 2022. 61. 2. 101-105
-
中村祐太, 石川和宏, 宮嶋陽司, 高田尚記, 小橋眞. Evaluation of the activation volume of Al10SiMg alloy fabricated by laser powder bed fusion. 軽金属学会大会講演概要. 2021. 141st
more...
Patents (1):
Books (8):
-
新春座談会2023 鉄が果たすべき役割とは
ふぇらむ Bulletin of the Iron and Steel Institute of Japan : (一社)日本鉄鋼協会会報 / 日本鉄鋼協会 編 2023
-
金属材料実験の手引き 1. 組織観察 1-4 光学顕微鏡, SEM 観察のための試料の調整
まてりあ・日本金属学会 2022
-
Fundamentals of Laser Powder Bed Fusion of Metals
Elsevier Inc. 2021 ISBN:9780128240908
-
3Dプリンタ用材料開発と 造形物の高精度化・第12章第2節 金属3Dプリンタによる鉄鋼材料の造形条件の確立
技術情報協会 2020 ISBN:9784861047930
-
物質循環とマテリアル開発 -マテリアル開発におけるシステム的思考の有用性ー
三恵社 2018 ISBN:9784864879682
more...
Lectures and oral presentations (194):
-
Talbot干渉計による積層造形Al-Fe合金組織の異方性測定
(軽金属学会 第 146 回春期大会 2024)
-
レーザー粉末床溶融法を用いて作製された Al-2.5%Fe合金の573 K焼鈍による諸特性の変化
(軽金属学会 第 146 回春期大会 2024)
-
レーザー粉末床溶融法により作製したAl-Fe-Ti合金の力学特性に与える573 K焼鈍の影響
(軽金属学会 第 146 回春期大会 2024)
-
異なる厚さのTiCを被覆した炭素材料とAlの 混合粉末へのシングルレーザスキャンに伴う 組織変化の評価
(軽金属学会 第 146 回春期大会 2024)
-
ボロノイ分割で設計したアルミニウム合金セ ル構造体の伝熱特性および圧力損失の数値 流体力学計算及び機械学習代理モデリング
(軽金属学会 第 146 回春期大会 2024)
more...
Education (2):
- - 2003 Kyushu University Graduate School, Division of Integrated Science and Engineering
- - 2001 Kyushu University Faculty of Engineering
Professional career (1):
- Doctor (Engineering) (Kyushu University)
Work history (7):
- 2017/04/01 - 現在 Nagoya University Graduate School of Engineering Materials Process Engineering 1 Associate professor
- 2015/09/01 - 2017/03/31 Nagoya University Graduate School of Engineering Department of Materials,Physics and Energy Engineering Biological Material Engineering Associate professor
- 2007/10 - 2015/08 Assistant professor, Dept. Metallurgy and Ceramics Science, Tokyo Institue of Technology Assistant Professor
- 2013/03 - 2013/03 University of Wisconsin-Madison School of Engineering Visiting Scientist
- 2011/09 - 2011/12 Brown University School of Engineering Visiting faculty
- 2006/04 - 2007/09 Dpt. of Adaptive Machine Systems, Osaka University Researcher
- 2007/03 - 2007/03 Max-Planck-Institut für Eisenforschung GmbH Visiting Scientist
Show all
Committee career (20):
- 2022/03 - 現在 The 13th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech 2023) International Advisory Board
- 2021/05 - 現在 Additive Manufacturing Letters Editorial Board
- 2020/04 - 現在 日本鉄鋼協会 材料の組織と特性部会 表面処理鋼板学術委員会 委員
- 2020/04 - 現在 ISIJ International associate editor
- 2020/04 - 現在 日本鉄鋼協会 材料の組織と特性部会 運営委員
- 2020/04/01 - 現在 日本鉄鋼協会 論文誌編集委員会 編集幹事
- 2019/10 - 現在 軽金属学会 編集委員会 編集幹事 編集幹事
- 2019/10 - 現在 Journal of Institute of Light Metals associate editor
- 2019/10 - 現在 軽金属学会 編集委員会 編集幹事
- 2019/04 - 現在 日本金属学会 講演大会第8分野(構造材料) 委員
- 2019/03 - 現在 国際鉄鋼科学シンポジウム(ISSS)企画WG 委員
- 2017/04 - 現在 アルミニウム協会中長期需要技術開発委員会 ロードマップ小委員会 委員
- 2016/04 - 現在 軽金属学会東海支部 評議員 評議員
- 2016/04 - 現在 日本金属学会・日本鉄鋼協会東海支部 支部評議員 支部評議員
- 2021/03 - 2021/06 Research Council of KU Leuven Reviewer
- 2016/04 - 2020/03 日本鉄鋼協会 論文誌編集委員会 専門委員
- 2018/08 - 2019/09 Metals Special Issue Editor "Advances in Selective Laser Melting"
- 2017/07 - 2019/09 軽金属学会 編集委員会 編集委員 委員
- 2017/07 - 2019/09 軽金属学会 編集委員会 委員
- 2018/03 - 2019/07 Tetsu-to-Hagané Special Issue “Fundamentals and Application Technologies for High-performance Hot-dip Galvanized Coatings” Guest Editor
Show all
Awards (11):
- 2023/03 - 公益社団法人 日本金属学会 日本金属学会 第81回 功績賞 材料創製プロセスが生み出す組織形成を利用した合金設計に関する研究
- 2022/11 - 一般社団法人 軽金属学会 軽金属躍進賞
- 2022/11 - 一般社団法人 軽金属学会 令和 4 年度軽金属論文賞 Al-Mg-Zn3元系の共晶反応を利用した Al 基鋳造合金の凝固組織と室温破壊靭性
- 2022/03 - 日本鉄鋼協会 日本鉄鋼協会 西山記念賞 表面処理鋼板の溶融めっき皮膜構造制御
- 2017/01 - 愛知県 第11回わかしゃち奨励賞 耐用温度200°Cを超える革新的耐熱アルミニウム鍛造合金の設計
- 2015/11 - Elsevier Outstanding Reviewer Status
- 2015/11 - 軽金属学会 軽金属論文賞
- 2013/03 - 日本鉄鋼協会 日本鉄鋼協会 研究奨励賞
- 2008/03 - 日本金属学会 第58回金属学会 組織写真賞奨励賞
- 2007/06 - International Conference on Recrystallization and Grain Growth III Best Poster Award
- 2004/11 - 軽金属学会 軽金属論文新人賞
Show all
Association Membership(s) (4):
The Japan Society for Heat Treatment
, The Japan Institue of Light Metals
, The Iron and Steel Institue of Japan
, Japan Institute of Metals and Materials
Return to Previous Page