Rchr
J-GLOBAL ID:201601010581348788
Update date: Apr. 21, 2024
Matsuno Takashi
マツノ タカシ | Matsuno Takashi
Affiliation and department:
Research field (4):
Machine materials and mechanics
, Manufacturing and production engineering
, Structural and functional materials
, Material fabrication and microstructure control
Research keywords (5):
solid mechanics
, ductile fracture
, assimilation
, structural material
, shearing process
Research theme for competitive and other funds (9):
- 2024 - 2029 逆解析フェイクを介した破断部金属組織の力学量分布同化解析と組織設計への展開
- 2023 - 2025 DP鋼の微視的延性破壊条件の同定を目的とした実画像ベース逆シミュレーションの開発
- 2021 - 2025 中Mn超高張力鋼の温間時不均一 変形による高延性化機構の解明と実成形への展開
- 2020 - 2023 放射光・FEMを活用した第三世代超高張力鋼の損傷挙動の解明と逆問題解析への発展
- 2018 - 2021 Investigation of secondary fracture mechanism at sheared edge of sheet metal through microstructure evaluation and FEM analysis
- 2018 - 2020 材料のミクロ不均一を考慮したせん断切り口凹凸予測シミュレーション
- 2018 - 2020 3次元微視構造を考慮した二相組織鋼の硬・軟質組織界面近傍における局部変形抵抗の逆推定
- 2017 - 2020 Development for new generation laminated high-strength steel
- 2017 - 2019 延性亀裂停留を再現可能なせん断加工シミュ レーション手法の開発
Show all
Papers (62):
-
Matsuno, T, Ueda, Y, Takahashi, T, Hama, T, Hojo, T, Shibayama, Y, Ridha, M, Okitsu Y, Takamura, M. Delayed fracture stress thresholds degraded by shear punching process in ultra-high-strength steel sheets: Analysis using an in-plane bending test with numerical assimilation. Journal of Manufacturing Process. 2024. 119. 1005-1021
-
Matsuno, T, Furukawa, K, Okitsu, Y, Koyama, M, Tsuchiyama, T. Local yield stress and its unusual independence on multi-axial stress states during Lüders deformation of medium-Mn, high-strength steel. ISIJ International. 2024. 64. 5. 859-867
-
Hama, T, Okamura, M, Nishi, T, Matsuno, T, Hayashi, S, Takada, K, Okitsu, Y. Crystal plasticity finite-element simulation of non-uniform deformation behavior at grain level of ultralow carbon steel. ISIJ International. 2024. 64. 3. 576-586
-
Matsuno, T, Kondo, D, Hama, T, Naito, T, Okitsu, Y, Hayashi, S, Takada, K. Flow stress curves for 980MPa- and 1.5GPa-class ultra-high-strength steel sheets weakened under high-stress triaxiality. International Journal of Mechanical Sciences. 2024. 261. 108671(16 pages)-108671
-
Watanabe, Y, Matsuno, T, Hama, T, Matsuda, T, Okitsu, Y, Hayashi, S, Takada, K, Naito, T. Microstructural ductile fracture analysis of 1180-MPa class martensite-matrix dual-phase steel via in-situ tensile test. ISIJ International. 2024. 64. 1. 116-125
more...
MISC (14):
-
松野崇. 板材の成形と加工における残留応力と製品欠陥 金属材料プレス成形における残留応力発生機構と不良事例. 素形材. 2022. 63. 2. 2-8
-
黒田充紀, 吉田健吾, 瀧澤英男, 松野崇. 年間展望: プロセッシング計算力学. ぷらすとす. 2020. 3. 33. 547-552
-
郡亜美, 鈴木優平, 三上隆男, 落合勇太, 松野崇. 穿孔法による超高張力鋼板カップ絞り品の残留応力測定. IIC Review. 2020. 64. 36-41
-
黒田充紀, 上森武, 浜孝之, 松野崇. 年間展望:プロセッシング計算力学. ぷらすとす (日本塑性加工学会会報誌). 2019. 2. 21. 573-578
-
Switching Control for Three-dimensional Attitude and Position of Free-floating Satellite. 2016. 60. 4p
more...
Patents (38):
-
連続穴抜き方法および連続穴抜き装置
-
せん断加工方法
-
せん断加工方法
-
プレス金型による切断加工方法
-
穴抜きパンチの刃先の観察方法
more...
Lectures and oral presentations (109):
-
亀裂線追加法とダメージモデルを組み合わせたせん断加工シミュレーションの検討
(日本塑性加工学会第74回塑性加工連合講演会 2023)
-
フェライト-マルテンサイト複合組織鋼板の結晶塑性解析における代表体積要素が加工硬化特性に与える影響
(日本塑性加工学会第74回塑性加工連合講演会 2023)
-
二相組織鋼における変形経路90度急変時の破断ひずみ向上現象の検証
(日本塑性加工学会第74回塑性加工連合講演会 2023)
-
Stress-criterion evaluation for delayed fracture on sheared thin ultra-high- strength steel sheets by a in-plane bending test with simultaneous cathodic hydrogen charge
(Advanced Technology in Experimental Mechanics and International DIC Society Joint Conference 2023 (ATEM-iDICs '23) 2023)
-
Flow stress curve evaluation in post- necking large strain region for ultra- high-strength steel sheets
(Advanced Technology in Experimental Mechanics and International DIC Society Joint Conference 2023 (ATEM-iDICs '23) 2023)
more...
Education (3):
- 2009 - 2013 九州大学 大学院 工学府 航空宇宙工学専攻 博士
- 2003 - 2005 九州大学 大学院 工学府 航空宇宙工学専攻 修士
- 1999 - 2003 Kyushu University
Professional career (1):
Work history (6):
Awards (3):
- 2014/06 - 日本塑性加工学会 新進賞
- 2010/06 - 日本塑性加工学会 優秀論文講演奨励賞
- 2004/12 - 計測自動制御学会 九州支部 奨励賞
Association Membership(s) (4):
日本材料学会
, THE JAPAN SOCIETY OF MECHANICAL ENGINEERS
, THE IRON AND STEEL INSTITUTE OF JAPAN
, THE JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY
Return to Previous Page