Art

J-GLOBAL ID：202002285819235672   Reference number：20A0365750

Development of Disc Friction Joining and its Application to Dissimilar Butt Joining of Aluminum and Resin Plates

ディスク摩擦接合の開発およびアルミニウムと樹脂板の異種突合せ接合への応用

Author (5)： Shibayanagi Toshiya (Department of Materials Design and Engineering, University of Toyama, 3190 Gofuku, Toyama, 930-8555, Japan) ,  Tajiri Norihiro (Graduate School of Science and Engineering for education, University of Toyama, Toyama, Japan) ,  Hirose Shyuhei (Graduate School of University of Toyama, (present: KYB Corporation, Gifu, Japan)) ,  Ishihara Satoru (Department of Materials Design and Engineering, University of Toyama, 3190 Gofuku, Toyama, 930-8555, Japan) ,  Sato Masaru (Graduate School of University of Toyama, (present: Toyama Industrial Technology Research and development Center, Toyama, Japan))
Material： 溶接学会論文集(Web)
Volume： 37  Issue： 4  Page： 1WL-3WL(J-STAGE)  Publication year： 2019 
JST Material Number： U0047A  ISSN： 0288-4771  Document type： Article
Article type： 原著論文  Country of issue： Japan (JPN)  Language： ENGLISH (EN)

Thesaurus term： pressure welding ,  *bonding and joining ,  heating ,  frictional heat ,  rotating disc ,  Aluminum ,  polyethylene terephthalate ,  *dissimilar material joining ,  welded joint ,  joint (part) ,  bond strength ,  tensile test ,  failure mode (mechanics) ,  interface (surface) ,  solid-phase welding ,  aromatic polyester
Semi thesaurus term： *ディスク摩擦接合 ,  樹脂板

Author keywords (12)： dissimilar joining ,  rotating disc ,  aluminum ,  polyethylene terephthalate ,  interfaces ,  tensile strength ,  dissimilar joining ,  rotating disc ,  aluminum ,  polyethylene terephthalate ,  interfaces ,  tensile strength

JST classification (2)： Welding techniques  (WC07030G) ,  Weldability,weldability test  (WC07070Y)

Reference (11)：

• 1) H. Kokawa, T. Suzuki and T. Kuwana: Effect of Initial Microstructure of Intermediate Material on Superplastic Diffusion Bonding of Duplex Stainless Steel, ISIJ International, 35-10 (1995), 1291-1297.
• 2) W. Li, A. Vairis, M. Preuss, Tiejun Ma: Linear and rotary friction welding review, J. International Materials Review, 61-2 (2016), 71-100.
• 3) H. Ji, Y. Qiao, M. Li: Rapid Formation of Intermetallic Joints through Ultrasonic-Assisted Die Bonding with Sn-0.7Cu Solder for High Temperature Packaging Application, Scripta Mater., 110-1 (2016), 19-23.
• 4) R. S. Mishra, Z. Y. Ma: Friction Stir Welding and Processing, Mater. Sci. Eng. R, 50-1-2 (2005) 1-78.
• 5) A. Ikuta, Y. H. Yin, T. H. North: Influence of Tool Thread on Mechanical Properties of Dissimilar Al Alloy Friction Stir Spot Welds, Sci. Tech. Welding & Joining, 17-8 (2012), 622-629.

Terms in the title (6)： ディスク ,  摩擦接合 ,  開発 ,  アルミニウム ,  突合せ接合 ,  応用