文献

J-GLOBAL ID：202202239787845504   整理番号：22A1060333

厳しい塑性変形によるナノ材料:歴史的発展と最近の進歩のレビュー【JST・京大機械翻訳】

Nanomaterials by severe plastic deformation: review of historical developments and recent advances

著者 (62件)： Edalati Kaveh (WPI, International Institute for Carbon-Neutral Energy Research (WPI-I2CNER), Kyushu University, Fukuoka, Japan) ,  Bachmaier Andrea (Erich Schmid Institute of Materials Science, Austrian Academy of Sciences, Leoben, Austria) ,  Beloshenko Victor A. (Donetsk Institute for Physics and Engineering named after A.A. Galkin, National Academy of Sciences of Ukraine, Kyiv, Ukraine) ,  Beygelzimer Yan (Donetsk Institute for Physics and Engineering named after A.A. Galkin, National Academy of Sciences of Ukraine, Kyiv, Ukraine) ,  Blank Vladimir D. (Technological Institute for Superhard and Novel Carbon Materials, Moscow, Russia) ,  Botta Walter J. (Departamento de Engenharia de Materiais, Universidade Federal de Sao Carlos, Sao Carlos-SP, Brazil) ,  Bryla Krzysztof (Faculty of Mechanical Engineering, Cracow University of Technology, Cracow, Poland) ,  Cizek Jakub (Department of Low Temperature Physics, Faculty of Mathematics and Physics, Charles University in Prague, Prague, Czech Republic) ,  Divinski Sergiy (Institute of Materials Physics, University of Muenster, Muenster, Germany) ,  Enikeev Nariman A. (Ufa State Aviation Technical University, Ufa, Russia) ,  Enikeev Nariman A. (Laboratory of Mechanics of Advanced Bulk Nanomaterials for Innovative Engineering Applications, Saint Petersburg State University, St. Petersburg, Russia) ,  Estrin Yuri (Department of Materials Science and Engineering, Monash University, Clayton, Australia) ,  Estrin Yuri (Department of Mechanical Engineering, The University of Western Australia, Crawley, Australia) ,  Faraji Ghader (School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran) ,  Figueiredo Roberto B. (Department of Metallurgical and Materials Engineering, Universidade Federal de Minas Gerais, Belo Horizonte, Brazil) ,  Fuji Masayoshi (Advanced Ceramics Research Center, Nagoya Institute of Technology, Tajimi, Japan) ,  Furuta Tadahiko (Data-Driven Material Processing Research-Domain, Toyota Central R&D Laboratories Inc., Nagakute, Japan) ,  Grosdidier Thierry (Laboratoire d’Etude des Microstructures et de Mecanique des Materiaux (LEM3 UMR 7239), Universite de Lorraine, Metz, France) ,  Grosdidier Thierry (Laboratory of Excellence on Design of Alloy Metals for low-mass Structures (DAMAS), Universite de Lorraine, Metz, France) ,  Gubicza Jenoe (Department of Materials Physics, Eotvos Lorand University, Budapest, Hungary) ,  Hohenwarter Anton (Department of Materials Science, Montanuniversitaet Leoben, Leoben, Austria) ,  Horita Zenji (WPI, International Institute for Carbon-Neutral Energy Research (WPI-I2CNER), Kyushu University, Fukuoka, Japan) ,  Horita Zenji (Graduate School of Engineering, Kyushu Institute of Technology, Kitakyushu, Japan) ,  Horita Zenji (Magnesium Research Center, Kumamoto University, Kumamoto, Japan) ,  Horita Zenji (Synchrotron Light Application Center, Saga University, Saga, Japan) ,  Huot Jacques (Hydrogen Research Institute, Departement de Chimie, Biochimie et Physique, Universite du Quebec a Trois-Rivieres, Trois-Rivieres, Canada) ,  Ikoma Yoshifumi (Department of Materials Science and Engineering, Kyushu University, Fukuoka, Japan) ,  Janecek Milos (Department of Physics of Materials, Faculty of Mathematics and Physics, Charles University in Prague, Prague, Czech Republic) ,  Kawasaki Megumi (School of Mechanical, Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR, USA) ,  Kral Petr (Academy of Sciences of the Czech Republic, Institute of Physics of Materials, Brno, Czech Republic) ,  Kuramoto Shigeru (College of Engineering, Ibaraki University, Mito, Japan) ,  Langdon Terence G. (Materials Research Group, Department of Mechanical Engineering, University of Southampton, Southampton, UK) ,  Leiva Daniel R. (Departamento de Engenharia de Materiais, Universidade Federal de Sao Carlos, Sao Carlos-SP, Brazil) ,  Levitas Valery I. (Departments of Aerospace Engineering and Mechanical Engineering, Iowa State University, Ames, IA, USA) ,  Levitas Valery I. (Division of Materials Science & Engineering, Ames Laboratory, Ames, IA, USA) ,  Mazilkin Andrey (Russian Academy of Sciences, Institute of Solid State Physics, Chernogolovka, Russia) ,  Mazilkin Andrey (Karlsruhe Institute of Technology (KIT), Institute of Nanotechnology, Eggenstein-Leopoldshafen, Germany) ,  Mito Masaki (Graduate School of Engineering, Kyushu Institute of Technology, Kitakyushu, Japan) ,  Miyamoto Hiroyuki (Department of Mechanical Engineering, Doshisha University, Kyoto, Japan) ,  Nishizaki Terukazu (Department of Electrical Engineering, Kyushu Sangyo University, Fukuoka, Japan) ,  Pippan Reinhard (Erich Schmid Institute of Materials Science, Austrian Academy of Sciences, Leoben, Austria) ,  Popov Vladimir V. (M.N. Miheev Institute of Metal Physics, Ural Branch of RAS, Ekaterinburg, Russia) ,  Popova Elena N. (M.N. Miheev Institute of Metal Physics, Ural Branch of RAS, Ekaterinburg, Russia) ,  Purcek Gencaga (Department of Mechanical Engineering, Karadeniz Technical University, Trabzon, Turkey) ,  Renk Oliver (Erich Schmid Institute of Materials Science, Austrian Academy of Sciences, Leoben, Austria) ,  Revesz Adam (Department of Materials Physics, Eotvos Lorand University, Budapest, Hungary) ,  Sauvage Xavier (Groupe de Physique des Materiaux, Normandie University, UNIROUEN, INSA Rouen, CNRS, Rouen, France) ,  Sklenicka Vaclav (Academy of Sciences of the Czech Republic, Institute of Physics of Materials, Brno, Czech Republic) ,  Skrotzki Werner (Institute of Solid State and Materials Physics, Dresden University of Technology, Dresden, Germany) ,  Straumal Boris B. (Russian Academy of Sciences, Institute of Solid State Physics, Chernogolovka, Russia) ,  Straumal Boris B. (Karlsruhe Institute of Technology (KIT), Institute of Nanotechnology, Eggenstein-Leopoldshafen, Germany) ,  Suwas Satyam (Department of Materials Engineering, Indian Institute of Science, Bangalore, India) ,  Toth Laszlo S. (Laboratoire d’Etude des Microstructures et de Mecanique des Materiaux (LEM3 UMR 7239), Universite de Lorraine, Metz, France) ,  Toth Laszlo S. (Laboratory of Excellence on Design of Alloy Metals for low-mass Structures (DAMAS), Universite de Lorraine, Metz, France) ,  Toth Laszlo S. (Institute of Physical Metallurgy, Metal Forming and Nanotechnology, University of Miskolc, Miskolc, Hungary) ,  Tsuji Nobuhiro (Department of Materials Science and Engineering, Kyoto University, Kyoto, Japan) ,  Tsuji Nobuhiro (Elements Strategy Initiative for Structural Materials (ESISM), Kyoto University, Kyoto, Japan) ,  Valiev Ruslan Z. (Ufa State Aviation Technical University, Ufa, Russia) ,  Valiev Ruslan Z. (Laboratory of Mechanics of Advanced Bulk Nanomaterials for Innovative Engineering Applications, Saint Petersburg State University, St. Petersburg, Russia) ,  Wilde Gerhard (Institute of Materials Physics, University of Muenster, Muenster, Germany) ,  Zehetbauer Michael J. (Physics of Nanostructured Materials, University of Vienna, Wien, Austria) ,  Zhu Xinkun (Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming, People’s Republic of China)
資料名： Materials Research Letters  (Materials Research Letters)
巻： 10  号： 4  ページ： 163-256  発行年： 2022年 
JST資料番号： W6001A  ISSN： 2166-3831  資料種別： 逐次刊行物 (A)
記事区分： 原著論文  発行国： イギリス (GBR)  言語： 英語 (EN)

抄録/ポイント： 激しい塑性変形(SPD)は,大きな密度の格子欠陥を有するバルク超微細結晶粒およびナノ構造材料を製造するのに有効である。この分野は,NanoSPDとしても知られており,過去20年間で著しい進展を経験した。高圧ねじり,等チャネル角プレス,累積ロール接合,ねじり押出,および多方向鍛造のような古典的SPD法の他に,種々の連続技術を導入して,スケールアップしたサンプルを製造した。さらに,多数の合金,ガラス,半導体,セラミック,重合体およびそれらの複合材料を処理した。SPD法を用いて,新しい材料を合成し,先進の機械的及び機能的特性を有する準安定相を安定化した。高延性,低/室温超塑性,耐クリープ性,水素貯蔵,光触媒水素生産,光触媒CO_2変換,超伝導,熱電性能,耐放射線性,耐食性,および生体適合性を組み合わせた高強度は,SPD加工材料のいくつかの強調特性である。本稿では,NanoSPD分野における最近の進展をレビューし,古代から現代への進展に関する簡潔な歴史を提供した。略語:ARB:Accumulative Roll-Bonding;BCC:体Centered cubic;DAC:ダイヤモンドアンビルセル;EBSD:Electron後方散乱回折;ECAP:Equal-Channel Angular Pressing(Extraction);FCC:面心立方;有限要素法:有限要素法;FSP:摩擦撹拌処理;HCP:六方晶閉鎖;HPT:高Presure Torsion;HPTT:高Presure Tube Twisting;MDF:多方向(-Axial)鍛造;NanoSPD:厳しい塑性変形によるナノ材料;SDAC:剪断(回転)ダイヤモンドアンビルセル;SEM:走査Electron顕微鏡;SMAT:表面機械的摩耗処理;SPD:重度の塑性変形;TE:Twist押出;TEM:透過Electron顕微鏡;UFG:超微細結晶粒GRAPHICAL ABSTRACT:この記事は,厳しい塑性変形による超微細結晶粒とナノ構造材料の開発に関する最近の進歩を包括的にレビューし,この分野の進展に関する短い歴史を提供する。Please refer to the publisher for the copyright holders. Translated from English into Japanese by JST.【JST・京大機械翻訳】

シソーラス用語： ガラス ,  合金 ,  剪断 ,  半導体 ,  有限要素法 ,  鍛造 ,  耐食性 ,  超塑性 ,  準安定相 ,  押出 ,  六方晶系 ,  *塑性変形 ,  耐放射線性 ,  生体適合性 ,  *ナノ材料

著者キーワード (5件)： 厳しい塑性変形(SPD) ,  表面強塑性変形 ,  超微細粒(UFG)材料 ,  機械的性質 ,  機能特性

分類 (2件)： 変態組織,加工組織  (WB01030N) ,  機械的性質  (WB02030U)

タイトルに関連する用語 (5件)： 塑性変形 ,  ナノ材料 ,  歴史 ,  発展 ,  レビュー