Gaku Okuma, Fumihiro Wakai. Synchrotron X-ray multiscale tomography: Visualization of heterogeneous microstructures and defects in ceramics. Journal of the American Ceramic Society. 2023
Kei Maeda, Gaku Okuma, Satoshi Yoshida, Fumihiro Wakai, Akihisa Takeuchi, Masayuki Uesugi, Shun Yanagioka, Shun Matsunuma, Shingo Machida, Atsuo Yasumori. Indentation-induced ductile behavior of glass-ceramics involving layered aluminosilicates. Journal of the American Ceramic Society. 2023
Gaku Okuma, Masaya Endo, Haruki Minagawa, Ryo Inoue, Hideki Kakisawa, Takuma Kohata, Toshio Osada, Takafumi Yamamoto, Masaki Azuma, Akihisa Takeuchi, et al. 3D visualization of morphological evolution of large defects during spark plasma sintering of alumina granules. Advanced Engineering Materials. 2023
Takashi Akatsu, Yoshihide Tabata, Yutaka Shinoda, Fumihiro Wakai. Effect of Equibiaxial Pre-Stress on Mechanical Properties Evaluated Using Depth-Sensing Indentation with a Point-Sharp Indenter. Materials. 2023. 16. 2. 528-528
Ryota Abe, Yuta Takahashi, Yuta Watanabe, Gaku Okuma, Fumihiro Wakai. Coarsening of metal/ceramics bicontinuous structures enhanced by stress-induced instability under cyclic thermal stress. Acta Materialia. 2022. 118526-118526
Gaku Okuma, Shun Kanchika, Satoshi Tanaka, Fumihiro Wakai. Evaluation of macroscopic mechanical properties from 3-D visualization of microstructure in sintering. Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 2017. 64. 9. 495-500
若井 史博, 赤津 隆, 篠田 豊. セラミックスの焼結力学 : 安全・安心のセキュアマテリアルに向けて (特集 焼成). Ceramics Japan = セラミックス : bulletin of the Ceramic Society of Japan. 2014. 49. 2. 82-86
A. Domínguez-Rodríguez, D. Gómez-García, F. Wakai. High temperature plasticity in yttria stabilised tetragonal zirconia polycrystals (Y-TZP). International Materials Reviews. 2013. 58. 7. 399-417
High-strain rate superplasticity in ceramics: Theoretical and experimental approach
2005 - 2006
学歴 (2件):
1978 - 1980 京都大学大学院 理学研究科 物理学第1専攻
1974 - 1978 京都大学 理学部 物理
学位 (1件):
工学博士 (京都大学)
経歴 (17件):
2022/10 - 現在 国立研究開発法人物質・材料研究機構 構造材料研究センター 特別研究員
2021/04 - 現在 東京工業大学
2017/04 - 2021/03 東京工業大学 科学技術創成研究院 フロンティア材料研究所 教授
2016/04 - 2017/03 東京工業大学 科学技術創成研究院 フロンティア材料研究所 所長
2015/04 - 2016/03 東京工業大学 応用セラミックス研究所 所長
1997 - 2006 :Tokyo Institute of Technology Center for Materials Design Professor
1997 - 2006 :東京工業大学 応用セラミックス研究所 構造デザイン研究センター 教授
2006 - -:Tokyo Intitute of Technology Materials and Structures Laboratory, Secure Materials Center Professor
2006 - -:東京工業大学 応用セラミックス研究所 セキュアマテリアル研究センター 教授
1995 - 1999 :Japan Science and Technology Corporation ICORP "Ceramics Superplasticity" Research Director
1995 - 1999 :科学技術振興事業団国際共同研究セラミックス超塑性プロジェクト 代表研究者
1993 - 1997 :National Industrial Research Institute of Nagoya, AIST, MITI Superplastic Nanoscience Laboratory Laboratory Chief
1993 - 1997 :通商産業省工業技術院名古屋工業技術研究所 超変形機能研究室 室長
1992 - 1993 :Max-Planck Institute for Metals Research Powder Metallurgy Laboratory Guest Researcher
1992 - 1993 :マックス・プランク金属研究所 粉末冶金研究所 客員研究員
1991 - 1992 :Agency of Industrial Science and Technology, Ministry of International Trade and Industry Planning office of future industrial technologies Senior Researcher
1991 - 1992 :通商産業省工業技術院 次世代産業技術企画官室 主任研究官
全件表示
委員歴 (15件):
2008 - 現在 Science of Sintering, Editorial board member 2008-
2005 - 現在 American Ceramic Society Associate Editor
2017 - 2020 Scientific Reports, Editorial Board member
2015/04 - 2020 日本学術振興会 先進セラミックス第124委員会 運営委員
2008 - 2020 粉体粉末冶金協会、 参事
1990 - 2020 超塑性研究会 運営委員
2015/06 - 2017/05 日本セラミックス協会 部会担当理事
2015/04 - 2017/03 日本セラミックス協会エンジニアリングセラミックス部会 部会長
2013/04 - 2015/03 日本セラミックス協会エンジニアリングセラミックス部会 副部会長
2006/12/01 - 2008/03/31 NEDO技術委員 分科会会長代理
2008 - Science of Sintering, Editorial board member 2008-
2006 - 日本セラミックス協会学術論文誌、ゲストエディター、2006, vol.11 Special issue dedicated to Prof. Gunter Petzow,
2005 - American Ceramics Society Associate Editor
2005 - Associate Editor, Journal of the American Ceramics Society 2005-
2003 - 2003 The Ceramics Society of Japan Kanto Division 、Structural Materials Division